KTM SMC 690 R 2023 Owner's Manual
![KTM SMC 690 R 2023 Motorcycle manual cover](/images/rmeEEOKTOTcsgfMHYMZifTRE/thumbs/thumb175x175.webp)
The recommended tire pressure for the KTM SMC 690 R 2023 is 29 psi (2.0 bar) for the front tire and 32 psi (2.2 bar) for the rear tire. Always check tire pressure when the tires are cold.
It is recommended to change the oil every 6,200 miles (10,000 kilometers) or at least once a year, whichever comes first. Always use the oil type specified in the owner’s manual.
If the engine overheats, pull over to a safe location and turn off the engine. Allow the engine to cool down before inspecting the coolant level. If necessary, top up with the recommended coolant. If overheating persists, consult a professional mechanic.
To improve fuel efficiency, ensure that your tires are properly inflated, follow the recommended maintenance schedule, avoid excessive idling, and ride at a moderate speed.
The correct chain tension for the KTM SMC 690 R 2023 should be between 5 mm and 7 mm of slack when measured at the midpoint between the front and rear sprockets.
To reset the service light, turn on the ignition, navigate to the service menu using the left handlebar control, and follow the on-screen instructions to confirm the reset.
Use a high-quality ethylene glycol-based coolant mixed with demineralized water in a 50:50 ratio, as specified in the owner’s manual.
To adjust the suspension, refer to the adjusters located on the front forks and rear shock. Follow the owner’s manual for specific settings to accommodate your weight and riding style.
If the electric start doesn't work, check the battery connections and ensure they are clean and tight. Verify that the battery is charged. If the problem persists, inspect the starter motor and related fuses.
Check the brake pads every 3,000 miles (5,000 kilometers) or whenever you notice a decrease in braking performance. Replace them if the pad thickness is less than 2 mm.