KTM SMC 690 R 2016 Owner's Manual
![KTM SMC 690 R 2016 Motorcycle manual cover](/images/iWyjgTbLVLUrGlVvzTyJumMm/thumbs/thumb175x175.webp)
To perform an oil change, warm up the engine, place the bike on a stand, and remove the drain plug to let the oil drain. Replace the oil filter and refill with the recommended oil type and amount.
The recommended tire pressure is typically 29 psi for the front tire and 32 psi for the rear tire, but you should consult the owner's manual for exact specifications.
Adjust the suspension by turning the compression and rebound damping screws located on the forks and rear shock. Refer to the KTM manual for specific settings based on terrain.
To replace the air filter, remove the seat, unscrew the air box cover, and take out the old filter. Insert the new filter, ensuring it is properly seated, and reassemble the components.
Check the battery charge, ensure the kill switch is off, inspect the spark plug for wear, and verify fuel delivery. If the issue persists, consult a professional mechanic.
Regular maintenance includes checking and replacing engine oil, inspecting brake pads and fluid, lubricating the chain, and ensuring tire pressure and tread are adequate.
Loosen the rear axle nut, adjust the chain tensioner bolts to achieve the correct slack, then retighten the axle nut. Ensure the chain alignment is correct before tightening.
Stop the motorcycle immediately to allow it to cool down. Check the coolant level and inspect for any leaks. If the problem persists, have the cooling system checked by a professional.
To reset the service light, turn the ignition on, navigate to the service menu on the display, and follow the prompts to reset the service interval. Consult the manual if necessary.
The KTM SMC 690 R 2016 requires unleaded gasoline with an octane rating of at least 95 RON for optimal performance.