KTM EXC-F 350 AU 2016 Owner's Manual
![KTM EXC-F 350 AU 2016 Motorcycle manual cover](/images/ibvbsicJLbpsWxTNSLBhHbYK/thumbs/thumb175x175.webp)
To change the oil, warm up the engine, place the bike on a stand, remove the skid plate, drain the old oil by removing the drain bolt, replace the oil filter, and refill with the recommended oil type and quantity.
The recommended tire pressure for the KTM EXC-F 350 AU 2016 is typically 12-14 psi for off-road use, but always check the owner's manual for specific recommendations.
Check the battery charge, ensure the kill switch is not engaged, inspect the spark plug, verify fuel delivery, and check the starter relay and wiring connections.
Regular maintenance includes oil changes every 15 hours of riding, air filter cleaning, chain lubrication, and checking the brake system and tire pressure. Refer to the owner's manual for detailed intervals.
Use the adjusters on the fork and shock to set the preload, compression, and rebound damping according to your riding style and terrain. Consult the manual for baseline settings and adjust from there.
Use a high-quality ethylene glycol-based coolant mixed with deionized water, or a ready-to-use motorcycle-specific coolant. Ensure it is compatible with aluminum engines.
Check the clutch cable adjustment, inspect clutch plates for wear, ensure proper oil type is used, and consider replacing the clutch springs if they are weak.
Inspect the coolant level, ensure the radiator is clean and unobstructed, check the thermostat, and verify the cooling fan is functioning properly.
Remove the seat, open the airbox cover, take out the old air filter, clean the airbox, install the new filter, and reassemble. Make sure the new filter is seated correctly.
Adjust the chain so there is approximately 50-55 mm of slack at the midpoint between the front and rear sprockets, when the bike is on a stand. Regularly check and lubricate the chain.