Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition - intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Overview of labels
- 2.6 Reporting safety defects
- 2.7 Noise emission warranty
- 2.8 Operating noise warning
- 2.9 Consumer rights
- 2.10 Tampering warning
- 2.11 Safe operation
- 2.12 Protective clothing
- 2.13 Work rules
- 2.14 Environment
- 2.15 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer and implied warranty
- 3.2 Operating and auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left side (example)
- 4.2 View of vehicle, rear right side (example)
5 SERIAL NUMBERS
- 5.1 Chassis number
- 5.2 Type label
- 5.3 Key number
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Horn button
- 6.5 Light switch
- 6.6 Turn signal switch
- 6.7 Emergency OFF switch
- 6.8 Electric starter button
- 6.9 Ignition/steering lock
- 6.10 Combination instrument
  - 6.10.1 Combination instrument overview
  - 6.10.2 Function buttons
  - 6.10.3 Tachometer
  - 6.10.4 Indicator lamps
  - 6.10.5 Display
  - 6.10.6 Speed display
  - 6.10.7 Setting the kilometers or miles
  - 6.10.8 Time
  - 6.10.9 Setting the clock
  - 6.10.10 ODO display
  - 6.10.11 Setting/resetting display TRIP 1
  - 6.10.12 Setting/resetting display TRIP 2
  - 6.10.13 TRIP F display
  - 6.10.14 GEAr display
  - 6.10.15 Coolant temperature indicator
- 6.11 Opening the filler cap
- 6.12 Closing filler cap
- 6.13 Seat unlocking
- 6.14 Handrails
- 6.15 Passenger footrest
- 6.16 Shift lever
- 6.17 Foot brake lever
- 6.18 Side stand
7 PREPARING FOR USE
- 7.1 Advice on first use
- 7.2 Running in the engine
- 7.3 Loading the vehicle
8 RIDING INSTRUCTIONS
- 8.1 Performing checks and vehicle care when preparing for use
- 8.2 Starting
- 8.3 Starting off
- 8.4 Shifting, riding
- 8.5 Applying the brakes
- 8.6 Stopping, parking
- 8.7 Transport
- 8.8 Refueling
9 SERVICE SCHEDULE
- 9.1 Additional information
- 9.2 Required work
- 9.3 Recommended work
10 TUNING THE CHASSIS
- 10.1 Fork/shock absorber
- 10.2 Adjusting the compression damping of the fork
- 10.3 Adjusting the rebound damping of the fork
- 10.4 Compression damping of the shock absorber
- 10.5 Adjusting the low-speed compression damping of the shock absorber
- 10.6 Adjusting the high-speed compression damping of the shock absorber
- 10.7 Adjusting the rebound damping of the shock absorber
- 10.8 Measuring the unloaded rear wheel sag
- 10.9 Checking the static sag of the shock absorber
- 10.10 Checking the riding sag of the shock absorber
- 10.11 Adjusting the spring preload of the shock absorber
- 10.12 Adjusting the riding sag
- 10.13 Handlebar position
- 10.14 Adjusting handlebar position
11 SERVICE WORK ON THE CHASSIS
- 11.1 Raising the motorcycle with a lift stand
- 11.2 Removing the motorcycle from the lift stand
- 11.3 Cleaning the dust boots of the fork legs
- 11.4 Loosening the fork protection
- 11.5 Positioning the fork protector
- 11.6 Checking the play of the steering head bearing
- 11.7 Adjusting the play of the steering head bearing
- 11.8 Removing the seat
- 11.9 Mounting the seat
- 11.10 Removing the air filter
- 11.11 Installing the air filter
- 11.12 Checking the chain for dirt
- 11.13 Cleaning the chain
- 11.14 Checking the chain tension
- 11.15 Adjusting the chain tension
- 11.16 Checking the chain, rear sprocket, engine sprocket, and chain guide
- 11.17 Adjusting chain guide
- 11.18 Adjusting basic position of clutch lever
- 11.19 Checking/correcting the fluid level of the hydraulic clutch
- 11.20 Removing the engine guard
- 11.21 Installing the engine guard
12 BRAKE SYSTEM
- 12.1 Antilock braking system (ABS)
- 12.2 Adjusting the basic position of the hand brake lever
- 12.3 Checking the brake discs
- 12.4 Checking brake fluid level of front brake
- 12.5 Topping up brake fluid of front brake.
- 12.6 Checking the front brake linings
- 12.7 Changing the front brake linings
- 12.8 Checking the free travel of foot brake lever
- 12.9 Adjusting the basic position of the foot brake lever
- 12.10 Checking rear brake fluid level
- 12.11 Adding rear brake fluid
- 12.12 Checking the rear brake linings
- 12.13 Changing the rear brake linings
13 WHEELS, TIRES
- 13.1 Removing the front wheel
- 13.2 Installing the front wheel
- 13.3 Removing the rear wheel
- 13.4 Installing the rear wheel
- 13.5 Checking the rear hub rubber dampers
- 13.6 Checking the tire condition
- 13.7 Checking the tire air pressure
- 13.8 Checking the spoke tension
14 ELECTRICAL SYSTEM
- 14.1 Removing the battery
- 14.2 Installing the battery
- 14.3 Recharging the battery
- 14.4 Changing the main fuse
- 14.5 Changing the ABS fuses
- 14.6 Changing the fuses of individual power consumers
- 14.7 Removing the headlight mask with the headlight
- 14.8 Installing the headlight mask with the headlight
- 14.9 Changing the headlight bulb
- 14.10 Changing the parking light bulb
- 14.11 Changing the turn signal bulb
- 14.12 Checking the headlight setting
- 14.13 Adjusting the headlight range
15 COOLING SYSTEM
- 15.1 Cooling system
- 15.2 Checking the antifreeze and coolant level
- 15.3 Checking the coolant level
- 15.4 Draining the coolant
- 15.5 Filling/bleeding the cooling system
16 TUNING THE ENGINE
- 16.1 Adjusting the engine characteristic
- 16.2 Checking the basic position of the shift lever
- 16.3 Adjusting the basic position of the shift lever
17 SERVICE WORK ON THE ENGINE
- 17.1 Checking the engine oil level
- 17.2 Changing the engine oil and filter, cleaning the oil screens
- 17.3 Draining the engine oil
- 17.4 Removing the oil filter
- 17.5 Cleaning the oil screens
- 17.6 Installing the oil filter
- 17.7 Filling up with engine oil
- 17.8 Adding engine oil
18 CLEANING, CARE
- 18.1 Cleaning the motorcycle
- 18.2 Checks and maintenance steps for winter operation
19 STORAGE
- 19.1 Storage
- 19.2 Preparing for use after storage
20 TROUBLESHOOTING
21 BLINK CODE
22 TECHNICAL DATA
- 22.1 Engine
- 22.2 Engine tightening torques
- 22.3 Capacities
  - 22.3.1 Engine oil
  - 22.3.2 Coolant
  - 22.3.3 Fuel
- 22.4 Chassis
- 22.5 Electrical system
- 22.6 Fork
- 22.7 Shock absorber
- 22.8 Chassis tightening torques
23 SUBSTANCES
24 AUXILIARY SUBSTANCES
25 STANDARDS
26 INDEX OF SPECIAL TERMS
27 LIST OF ABBREVIATIONS
28 LIST OF SYMBOLS
- 28.1 Red symbols
- 28.2 Yellow and orange symbols
- 28.3 Green and blue symbols
INDEX
- A
- B
- C
- E
- F
- H
- I
- K
- L
- M
- O
- P
- R
- S
- T
- U
- V
- W

KTM Enduro 690 R 2017 Owner's Manual

KTM Enduro 690 R 2017 Motorcycle manual cover

Pages 226

Year 2017

Language(s)

of 226

KTM Enduro 690 R 2017 Motorcycle Specification

The KTM Enduro 690 R 2017 Motorcycle is a high-performance off-road machine designed for both rugged terrains and everyday usability. It features a 690cc single-cylinder, 4-stroke engine delivering a robust power output of approximately 67 horsepower. The engine is liquid-cooled and incorporates advanced fuel injection, ensuring reliable performance and efficiency. The motorcycle is equipped with a 6-speed transmission that provides smooth gear transitions for optimal control across various terrains.

The frame of the KTM Enduro 690 R is constructed from lightweight chrome-molybdenum steel, offering exceptional durability and flexibility. The suspension system comprises WP USD forks at the front and a WP monoshock at the rear, both fully adjustable to suit different riding conditions and styles. The bike's ground clearance is substantial, allowing riders to tackle challenging obstacles with ease.

Braking is managed by Brembo components, featuring a 300mm disc at the front and a 240mm disc at the rear, providing reliable stopping power. The motorcycle rides on 21-inch front and 18-inch rear wheels, shod with dual-sport tires that balance on-road stability with off-road traction.

The ergonomics of the KTM Enduro 690 R are designed for comfort and control. The seat height is set at approximately 35.8 inches, providing a commanding view while allowing maneuverability. The fuel tank has a capacity of around 3.2 gallons, offering a decent range for extended rides.

Additional features include a multifunctional digital display, a high-performance exhaust system, and advanced electronics such as switchable ABS and multiple riding modes. The KTM Enduro 690 R 2017 is a versatile motorcycle that blends cutting-edge technology with rugged reliability, making it an ideal choice for enthusiasts seeking adventure both on and off the road.

KTM Enduro 690 R 2017 Motorcycle F.A.Q.

What type of oil is recommended for the KTM Enduro 690 R 2017?

The recommended oil for the KTM Enduro 690 R 2017 is a fully synthetic 10W-50 oil, suitable for high-performance 4-stroke motorcycles.

How often should I change the oil on my KTM Enduro 690 R 2017?

It's advised to change the oil every 6,000 miles (10,000 kilometers) or once a year, whichever comes first.

What is the correct tire pressure for the KTM Enduro 690 R 2017?

The recommended tire pressure is 22 psi for the front tire and 25 psi for the rear tire when riding off-road. Adjust accordingly for on-road use.

How can I troubleshoot starting issues on my KTM Enduro 690 R 2017?

Check the battery charge, inspect the spark plug for wear, ensure the fuel is fresh, and verify the kill switch is in the correct position.

What should I do if the KTM Enduro 690 R 2017 engine overheats?

Stop the engine immediately, allow it to cool down, check the coolant level, and inspect for leaks or obstructions in the radiator.

How do I adjust the chain tension on my KTM Enduro 690 R 2017?

Loosen the rear axle nut, adjust the chain tensioner to achieve 5-7 mm of slack at the tightest point, and retighten the axle nut.

What is the maintenance schedule for the KTM Enduro 690 R 2017?

Regular maintenance includes oil changes every 6,000 miles, checking the brake pads every 3,000 miles, and inspecting the air filter every 1,500 miles.