KTM Duke 1290 Super R Evo 2022 Owner's Manual
![KTM Duke 1290 Super R Evo 2022 Motorcycle manual cover](/images/RHXXHQkhnWAliHQZThhiLOAW/thumbs/thumb175x175.webp)
To perform an oil change, warm up the engine, place the bike on a stable stand, remove the oil drain plug, let the oil drain completely, replace the oil filter, and refill with the recommended oil type and quantity.
For the KTM Duke 1290 Super R Evo 2022, the recommended tire pressure is typically 32 psi for the front tire and 36 psi for the rear tire. Always check the owner’s manual for specifics.
Start by checking the throttle cables for tension and lubrication. Ensure the air filter is clean and inspect the fuel system for any blockages or issues. If problems persist, consult a professional technician.
Regular maintenance includes oil changes every 4,500 miles, checking and adjusting the chain, inspecting brakes, and performing a full inspection every 9,000 miles. Refer to the user manual for a detailed schedule.
Use the adjusters located on the front forks and rear shock. For softer settings, turn counter-clockwise, and for firmer settings, turn clockwise. Adjust according to the load and riding style.
Safely pull over and stop the engine. Check for any obvious issues such as loose connections or low fluid levels. If the issue is not apparent, have a professional diagnose the problem using a diagnostic tool.
Maintain proper tire pressure, perform regular maintenance, avoid aggressive acceleration, and ensure the air filter is clean. Riding at a consistent speed also helps improve fuel efficiency.
Common causes include low coolant levels, blocked radiators, or a faulty thermostat. Ensure regular coolant checks, keep the radiator clean, and service the cooling system as per the maintenance schedule.
To replace brake pads, remove the caliper, take out the old pads, install new pads, and reattach the caliper. Make sure to check the brake fluid level and test the brakes before riding.
Use a suitable chain cleaner to remove dirt and grime. After cleaning, dry the chain and apply a high-quality motorcycle chain lubricant. Ensure even coverage while rotating the wheel.