Contents

1 MEANS OF REPRESENTATION
- 1.1 Symbols used
- 1.2 Formats used
2 SAFETY ADVICE
- 2.1 Use definition intended use
- 2.2 Misuse
- 2.3 Safety advice
- 2.4 Degrees of risk and symbols
- 2.5 Tampering warning
- 2.6 Safe operation
- 2.7 Protective clothing
- 2.8 Work rules
- 2.9 Environment
- 2.10 Owner's Manual
3 IMPORTANT NOTES
- 3.1 Manufacturer and implied warranty
- 3.2 Fuel, auxiliary substances
- 3.3 Spare parts, accessories
- 3.4 Service
- 3.5 Figures
- 3.6 Customer service
4 VIEW OF VEHICLE
- 4.1 View of vehicle, front left (example)
- 4.2 View of vehicle, rear right (example)
5 SERIAL NUMBERS
- 5.1 Vehicle identification number
- 5.2 Type label
- 5.3 Key number
- 5.4 Engine number
- 5.5 Fork part number
- 5.6 Shock absorber article number
- 5.7 Steering damper article number
6 CONTROLS
- 6.1 Clutch lever
- 6.2 Hand brake lever
- 6.3 Throttle grip
- 6.4 Combination switch, left side
- 6.5 Light switch
- 6.6 Cruise control system tip switch
- 6.7 Menu buttons
- 6.8 Turn signal switch
- 6.9 Horn button
- 6.10 Combination switch, right
- 6.11 Hazard warning flasher switch
- 6.12 Emergency OFF switch/electric starter button
- 6.13 Race-on button
- 6.14 Steering lock (antenna)
- 6.15 Immobilizer
- 6.16 Raceon key
- 6.17 Socket for electrical accessories
- 6.18 USB socket
- 6.19 Opening fuel tank filler cap
- 6.20 Closing the fuel tank filler cap
- 6.21 Fuel cocks
- 6.22 Opening storage compartment
- 6.23 Closing storage compartment
- 6.24 Seat lock
- 6.25 Grab handles
- 6.26 Luggage rack plate
- 6.27 Case holders
- 6.28 Passenger foot pegs
- 6.29 Shift lever
- 6.30 Foot brake lever
- 6.31 Side stand
- 6.32 Center stand
7 COMBINATION INSTRUMENT
- 7.1 Combination instrument
- 7.2 Activation and test
- 7.3 Day-Night mode
- 7.4 Warnings
- 7.5 Ice warning
- 7.6 Indicator lamps
- 7.7 Display
- 7.8 Speed
- 7.9 Shift warning light
- 7.10 Cruise control indicator
- 7.11 Speed
- 7.12 ABS display
- 7.13 MTC display
- 7.14 Ride display
- 7.15 Heated grip (optional)
- 7.16 Seat heater (optional)
- 7.17 Coolant temperature indicator
- 7.18 Fuel level display
- 7.19 Ambient air temperature indicator
- 7.20 Time
- 7.21 Favourites display
- 7.22 Quick Selector 1 display
- 7.23 Quick Selector 2 display
- 7.24 Navigation display (optional)
- 7.25 Menu
  - 7.25.1 KTM MY RIDE (optional)
  - 7.25.2 Audio (optional)
  - 7.25.3 Navigation (optional)
  - 7.25.4 Navigation Setup (optional)
  - 7.25.5 Navigation information (optional)
  - 7.25.6 Volume (optional)
  - 7.25.7 Setup (optional)
  - 7.25.8 Bluetooth (optional)
  - 7.25.9 Phone (optional)
  - 7.25.10 Headset Rider (optional)
  - 7.25.11 Headset Pass. (optional)
  - 7.25.12 Wireless Interface
  - 7.25.13 Telephony (optional)
  - 7.25.14 Info
  - 7.25.15 Trip 1
  - 7.25.16 Trip 2
  - 7.25.17 General Info
  - 7.25.18 TPMS
  - 7.25.19 Warnings
  - 7.25.20 Service
  - 7.25.21 Extra Functions
  - 7.25.22 Motorcycle
  - 7.25.23 Heated Grips (optional)
  - 7.25.24 Heated Seat (optional)
  - 7.25.25 Ride Mode
  - 7.25.26 MTC
  - 7.25.27 MTC+MSR (optional)
  - 7.25.28 ABS
  - 7.25.29 HHC (optional)
  - 7.25.30 Settings
  - 7.25.31 Favourites
  - 7.25.32 Navi Info Screen
  - 7.25.33 Quick Selector 1
  - 7.25.34 Quick Selector 2
  - 7.25.35 Preferences
  - 7.25.36 Units
  - 7.25.37 Distance
  - 7.25.38 Temperature
  - 7.25.39 Pressure
  - 7.25.40 Consumption
  - 7.25.41 Language
  - 7.25.42 Shift Light
  - 7.25.43 Setting the time and date
  - 7.25.44 DRL
  - 7.25.45 Quickshifter + (optional)
  - 7.25.46 Heated Grips (optional)
  - 7.25.47 Heated Seat Rid (optional)
  - 7.25.48 Heated Seat Pas (optional)
  - 7.25.49 Cornering Light Test
8 ERGONOMICS
- 8.1 Handlebar position
- 8.2 Adjusting the handlebar position
- 8.3 Adjusting the windshield
- 8.4 Adjusting the basic position of the clutch lever
- 8.5 Adjusting the basic position of the hand brake lever
- 8.6 Rider footrests
- 8.7 Adjusting the footrests
- 8.8 Checking the basic position of the shift lever
- 8.9 Adjusting the basic position of the shift lever
- 8.10 Setting the shift lever stub
- 8.11 Adjusting the basic position of the foot brake lever
- 8.12 Adjusting the tilt of the combination instrument
9 PREPARING FOR USE
- 9.1 Advice on preparing for first use
- 9.2 Running in the engine
- 9.3 Loading the vehicle
10 RIDING INSTRUCTIONS
- 10.1 Checks and maintenance measures when preparing for use
- 10.2 Starting
- 10.3 Starting off
- 10.4 Quickshifter + (optional)
- 10.5 Starting off with HHC (optional)
- 10.6 Shifting, riding
- 10.7 MSR (optional)
- 10.8 Applying the brakes
- 10.9 Stopping, parking
- 10.10 Transporting
- 10.11 Refueling
11 SERVICE SCHEDULE
- 11.1 Additional information
- 11.2 Required work
- 11.3 Recommended work
12 SUSPENSION SETTING
- 12.1 Fork/shock absorber
- 12.2 Adjusting the compression damping of the fork
- 12.3 Adjusting the rebound damping of the fork
- 12.4 Adjusting the spring pretension of the fork
- 12.5 Compression damping of the shock absorber
- 12.6 Adjusting the low-speed compression damping of the shock absorber
- 12.7 Adjusting the high-speed compression damping of the shock absorber
- 12.8 Adjusting the rebound damping of the shock absorber
- 12.9 Adjusting the spring pretension of the shock absorber
13 SERVICE WORK ON THE CHASSIS
- 13.1 Raising the vehicle with the center stand
- 13.2 Removing the vehicle from the center stand
- 13.3 Removing the seat
- 13.4 Mounting the seat
- 13.5 Checking for chain dirt
- 13.6 Cleaning the chain
- 13.7 Checking the chain tension
- 13.8 Adjusting the chain tension
- 13.9 Checking the chain, rear sprocket, and engine sprocket
- 13.10 Checking/correcting the fluid level of the hydraulic clutch
- 13.11 Checking steering head bearing play
- 13.12 Removing the bottom triple clamp cover
- 13.13 Installing the bottom triple clamp cover
- 13.14 Removing the front side cover
- 13.15 Installing the front side cover
- 13.16 Removing the mask spoiler
- 13.17 Installing the mask spoiler
- 13.18 Removing front fender
- 13.19 Installing front fender
- 13.20 Cleaning the dust boots of the fork legs
- 13.21 Removing the fuel tank cover
- 13.22 Installing the fuel tank cover
- 13.23 Removing the windshield
- 13.24 Installing the windshield
- 13.25 Removing the engine guard
- 13.26 Installing the engine guard
- 13.27 Removing the crash bar
- 13.28 Installing the crash bar
14 BRAKE SYSTEM
- 14.1 Anti-lock braking system (ABS)
- 14.2 Checking the brake discs
- 14.3 Checking the front brake fluid level
- 14.4 Adding front brake fluid
- 14.5 Checking the front brake linings
- 14.6 Checking the rear brake fluid level
- 14.7 Adding rear brake fluid
- 14.8 Checking the rear brake linings
15 WHEELS, TIRES
- 15.1 Removing the front wheel
- 15.2 Installing the front wheel
- 15.3 Removing the rear wheel
- 15.4 Installing the rear wheel
- 15.5 Checking the rear hub damping rubber pieces
- 15.6 Checking the tire condition
- 15.7 Checking tire pressure
- 15.8 Checking spoke tension
- 15.9 Tubeless tire system
- 15.10 Using tire repair spray
16 ELECTRICAL SYSTEM
- 16.1 Daytime running light (DRL)
- 16.2 Cornering light
- 16.3 Removing the 12-V battery
- 16.4 Installing the 12-V battery
- 16.5 Charging the 12-V battery
- 16.6 Changing the Race-on key battery
- 16.7 Changing the main fuse
- 16.8 Changing the fuses in the fuse box
- 16.9 Checking the headlight setting
- 16.10 Adjusting the headlight range
- 16.11 Diagnostics connector
- 16.12 Front ACC1 and ACC2
- 16.13 ACC1 and ACC2 rear
17 COOLING SYSTEM
- 17.1 Checking the coolant level in the compensating tank
- 17.2 Correcting the coolant level in the compensating tank
18 TUNING THE ENGINE
- 18.1 Ride Mode
- 18.2 Motorcycle traction control (MTC)
19 SERVICE WORK ON THE ENGINE
- 19.1 Checking the engine oil level
- 19.2 Changing the engine oil and oil filter, cleaning the oil screens
- 19.3 Adding engine oil
20 CLEANING, CARE
- 20.1 Cleaning the motorcycle
- 20.2 Checks and maintenance steps for winter operation
21 STORAGE
- 21.1 Storage
- 21.2 Preparing for use after storage
22 TROUBLESHOOTING
23 TECHNICAL DATA
- 23.1 Engine
- 23.2 Engine tightening torques
- 23.3 Capacities
  - 23.3.1 Engine oil
  - 23.3.2 Coolant
  - 23.3.3 Fuel
- 23.4 Chassis
- 23.5 Electrical system
- 23.6 Tires
- 23.7 Fork
- 23.8 Shock absorber
- 23.9 Chassis tightening torques
24 DECLARATIONS OF CONFORMITY
- 24.1 Declarations of conformity
- 24.2 Country-specific declarations of conformity
25 OPEN SOURCE
- 25.1 Information on open source software
26 SUBSTANCES
27 AUXILIARY SUBSTANCES
28 STANDARDS
29 INDEX OF SPECIAL TERMS
30 LIST OF ABBREVIATIONS
31 LIST OF SYMBOLS
- 31.1 Red symbols
- 31.2 Yellow and orange symbols
- 31.3 Green and blue symbols
INDEX
- 1
- A
- B
- C
- D
- E
- F
- G
- H
- I
- K
- L
- M
- O
- P
- Q
- R
- S
- T
- U
- V
- W

KTM Adventure 1290 Super R 2020 Owner's Manual

KTM Adventure 1290 Super R 2020 Motorcycle manual cover

Pages 358

Year 2020

Language(s)

of 358

KTM Adventure 1290 Super R 2020 Motorcycle Specification

The KTM Adventure 1290 Super R 2020 is a high-performance motorcycle engineered for long-distance touring and off-road capability. It is powered by a 1301cc V-twin engine, delivering an impressive 160 horsepower and 140 Nm of torque. This powerhouse engine is coupled with a six-speed transmission featuring a Quickshifter+ for seamless gear transitions. The motorcycle's frame is constructed from a chromium-molybdenum steel trellis, providing a robust yet lightweight structure.

The suspension system is designed for versatility and includes fully adjustable WP XPLOR forks at the front with 220mm of travel and a WP XPLOR PDS shock at the rear with 220mm of travel. This setup ensures optimal handling and comfort on both paved and rough terrain. The braking system features dual 320mm front discs with four-piston radial calipers and a 267mm rear disc with a two-piston caliper, equipped with advanced ABS for enhanced safety.

The KTM Adventure 1290 Super R 2020 boasts a 7-inch TFT display that provides clear and comprehensive information, including navigation, trip data, and bike status. The display is complemented by KTM’s My Ride smartphone connectivity for added convenience. The motorcycle is equipped with a 23-liter fuel tank, allowing for extended travel without frequent refueling stops.

Ergonomically designed for rider comfort, the bike features adjustable handlebars, footpegs, and seat height. The advanced electronics suite includes traction control, cornering ABS, multiple ride modes, and a customizable suspension setting to adapt to various riding conditions. With a dry weight of 217 kg, the KTM Adventure 1290 Super R 2020 combines power, agility, and advanced technology, making it an ideal choice for adventure enthusiasts seeking both on-road and off-road performance.

KTM Adventure 1290 Super R 2020 Motorcycle F.A.Q.

How do I properly maintain the chain on my KTM Adventure 1290 Super R 2020?

To maintain the chain, regularly check for tension and lubrication. Clean the chain with a suitable chain cleaner and brush, then apply a high-quality chain lubricant. Ensure the chain tension is within the specified range of 40-45mm.

What should I do if the engine of my KTM Adventure 1290 Super R 2020 won't start?

Check the fuel level, battery charge, and ensure the kill switch is in the 'RUN' position. Inspect the fuses and spark plugs, and ensure the clutch lever is pulled in during startup.

How can I adjust the suspension settings on my KTM Adventure 1290 Super R 2020 for off-road riding?

For off-road riding, adjust the suspension by increasing the rebound and compression damping. Refer to the owner's manual for recommended settings based on rider weight and terrain.

What is the recommended tire pressure for the KTM Adventure 1290 Super R 2020?

The recommended tire pressure for the KTM Adventure 1290 Super R 2020 is 2.5 bar (36 psi) for the front tire and 2.9 bar (42 psi) for the rear tire. Adjust according to load and riding conditions.

How do I reset the service light on my KTM Adventure 1290 Super R 2020?

To reset the service light, navigate to the 'Settings' menu on the TFT display, select 'Service', then follow the prompts to reset the service interval. Consult the owner's manual for detailed instructions.

What should I do if the ABS warning light stays on while riding my KTM Adventure 1290 Super R 2020?

If the ABS warning light stays on, check the ABS sensors and wiring for damage. Restart the motorcycle to see if the light resets. If the issue persists, consult a professional technician.

How often should I change the oil on my KTM Adventure 1290 Super R 2020?

The oil should be changed every 9,320 miles (15,000 km) or once a year, whichever comes first. Use a high-quality, fully synthetic oil as recommended by KTM.

What type of coolant is recommended for the KTM Adventure 1290 Super R 2020?

Use a high-performance ethylene glycol-based coolant with corrosion inhibitors. Ensure the coolant is suitable for aluminum engines and complies with the standards specified in the owner’s manual.

How can I improve the fuel efficiency of my KTM Adventure 1290 Super R 2020?

To improve fuel efficiency, maintain a steady speed, avoid rapid acceleration, keep tires properly inflated, and ensure regular maintenance such as air filter and spark plug replacements.

What should I check if I experience poor braking performance on my KTM Adventure 1290 Super R 2020?

Check the brake pads for wear, ensure the brake fluid is at the correct level and not contaminated, and inspect the brake discs for damage. If necessary, bleed the brake system to remove air bubbles.