Krups XP320850 User Manual
![Krups XP320850 Coffee Machine manual cover](/images/FXGbcxiwbDhWqhGDcFYwdWDj/thumbs/thumb175x175.webp)
To descale your Krups XP320850, fill the water tank with a mixture of descaling solution and water as per the instructions on the descaling product. Place a container under the steam nozzle and run the machine through a cycle as if making coffee, without coffee grounds. Repeat the process with clean water to rinse.
If your Krups XP320850 is not brewing, check if the water tank is filled and properly placed. Ensure that the coffee grounds are not too fine, which can clog the filter. Also, check for any blockages in the machine’s pipes or filter.
To clean the steam nozzle, first turn off and unplug the machine. Remove the nozzle and soak it in warm, soapy water. Use a small brush to remove any milk residue. Rinse thoroughly and reattach before use.
Check if the water tank is correctly positioned and not overfilled. Inspect seals and gaskets for damage and replace them if necessary. Make sure the drip tray is not full and properly seated.
To adjust coffee strength, alter the amount of coffee grounds used or adjust the grind size. Finer grinds typically produce stronger coffee, whereas coarser grinds result in a milder brew.
The ideal grind size for the Krups XP320850 is medium to fine. It should be slightly finer than sand but not as fine as powder to ensure optimal extraction without clogging the filter.
Clean the Krups XP320850 after every use by rinsing the drip tray and coffee grounds container. Descale the machine every 3 months or after 40 brews to maintain performance.
Loud noises may be due to blockages or the build-up of scale. Perform a descaling process and check for any obstructions in the machine. Ensure that all components are properly seated and nothing is loose.
Ensure the machine is plugged into a functioning power outlet. Check the power cord for any visible damage. If the machine doesn’t turn on, try resetting it by unplugging for a minute and then plugging it back in.
Ensure that the machine has had sufficient time to preheat. Check the temperature settings and adjust if necessary. If the issue persists, it might require a descaling to improve heating efficiency.