Krups Savoy ET450 User Manual

To descale the Krups Savoy ET450, fill the water reservoir with a mixture of water and descaling solution. Run a brew cycle without coffee. Repeat the process with clean water to rinse.
Check if the machine is plugged in and the outlet is working. Ensure that the power button is pressed. If it still doesn't turn on, refer to the user manual or contact customer support.
Use the coffee strength selector button on the control panel to choose your preferred strength, ranging from mild to strong.
If the coffee brews slowly, the machine may need descaling. Also, check if the coffee filter is clogged and clean it if necessary.
Press the program button, set the desired time using the hour and minute buttons, and confirm. Ensure the auto-brew function is activated.
The Krups Savoy ET450 uses a standard paper coffee filter or a permanent filter. Ensure the filter size matches the filter basket.
Wash the coffee pot and filter basket with warm soapy water. Rinse thoroughly and allow them to dry before reassembling.
Ensure the warming plate is clean and functioning. If the issue persists, check the brewing temperature in the settings if available.
To reset to factory settings, unplug the machine, wait a few minutes, then plug it back in. Reconfigure your preferred settings.
Check if the water reservoir is properly seated and not overfilled. Inspect the sealing ring and replace it if damaged.