Krups Savoy 12 Cup EC314050 User Manual

To program the Krups Savoy, press the 'Prog' button until the display shows 'Prog' and the time flashes. Use the 'h' and 'min' buttons to set the desired start time, then press 'Prog' again to confirm.
Ensure the coffee machine is plugged in and the water reservoir is filled. Check that the filter and coffee grounds are correctly placed. If the problem persists, descale the machine following the manual's instructions.
It's recommended to clean the coffee machine after every use. Descale the machine every 3 months or more frequently if you have hard water.
Yes, you can use standard #4 cone paper filters with the Krups Savoy coffee machine.
To descale, fill the water reservoir with a mixture of half water and half white vinegar. Run a brewing cycle without coffee. After the cycle, run two more cycles with clean water to rinse.
Ensure you are using the correct amount of coffee grounds for the water volume. Adjust the grind size if necessary, and make sure the filter and machine are clean to avoid clogs.
Yes, the Krups Savoy is compatible with reusable mesh filters designed for 12-cup coffee makers.
Ensure the machine is preheated by running a cycle with water before brewing coffee. Use freshly boiled water in the reservoir to maintain a higher starting temperature.
Check if the water reservoir is properly seated and there are no cracks. Inspect the carafe for damage and ensure it is positioned correctly under the filter basket.
To reset the Krups Savoy to factory settings, unplug the machine, wait for a minute, and then plug it back in. This will reset the clock and any programmed settings.