Krups KM206D50 User Manual
![Krups KM206D50 Coffee Machine manual cover](/images/adIxMZODuQsMvXrEuzhQlblO/thumbs/thumb175x175.webp)
To descale your Krups KM206D50, fill the water reservoir with a mixture of equal parts water and white vinegar. Run a brew cycle without coffee grounds. After the cycle is complete, run two more cycles with clean water to rinse.
Ensure the machine is plugged in and the power switch is turned on. Check the outlet by testing another device. If the problem persists, inspect the power cord for damage.
Remove the coffee filter and discard any grounds. Wash the filter in warm, soapy water and rinse thoroughly. You can also place it in the top rack of a dishwasher.
Slow brewing can be caused by mineral buildup. Descale the machine and clean the coffee filter. Ensure the water reservoir is filled to the correct level.
Use medium grind coffee for the best results with the Krups KM206D50. Fine grinds can clog the filter and slow down the brewing process.
Press the 'Prog' button, then use the hour and minute buttons to set the desired time. Press 'Prog' again to confirm the timer setting.
Ensure you are using the correct coffee-to-water ratio. Adjust the grind size to medium and clean the machine to ensure no blockages are affecting the brewing process.
Avoid overfilling the water reservoir and ensure the carafe is properly positioned. Check that the filter basket is not overfilled with coffee grounds.
Regularly clean the coffee maker, including the carafe, filter basket, and water reservoir. Descale the machine every 2-3 months depending on usage and water hardness.
Yes, you can use the machine to brew tea by placing tea leaves or tea bags in the filter basket, then running a brew cycle with water only.