Krups CalviSteam XP344 User Manual

To descale your Krups CalviSteam XP344, fill the water tank with a mixture of water and descaling solution. Place a container under the steam nozzle and run a descaling cycle by turning on the machine and activating the steam function. Rinse the machine by running a cycle with clean water.
Ensure that the water tank is filled, the machine is properly plugged in, and the portafilter is correctly inserted. Check if the grounds are not too fine, and clean any clogged parts.
Use cold milk and a chilled frothing pitcher. Position the steam nozzle just below the surface of the milk to create a whirlpool effect. Gradually lower the jug as the milk expands to maintain the frothing process.
Ensure you are using the correct grind size and amount of coffee. A finer grind and more coffee grounds can result in a stronger brew. Also, check that the portafilter is properly tamped and locked in place.
After each use, purge the steam wand by allowing steam to escape for a few seconds. Wipe the wand with a damp cloth and occasionally soak it in warm, soapy water to dissolve any milk residue.
Store the machine in a cool, dry place. Ensure that the water tank is empty, and clean all removable parts before storage. Cover the machine to prevent dust accumulation.
Check if the portafilter is correctly seated and tightened. Inspect the gasket for wear and replace it if necessary. Ensure the coffee grounds are not causing an obstruction.
Yes, you can use pre-ground coffee. Use a medium grind size for optimal results, and ensure that the grounds are fresh for the best flavor.
Check the power supply and ensure the machine is securely plugged in. If the problem persists, descale the machine to remove any mineral buildup that might affect heating.
Replace the water filter every two months or after 60 uses to ensure optimal water quality and machine performance.