Krups BW399050 User Manual
![Krups BW399050 Kettle manual cover](/images/hMHJLaWMeSvjnoQFcfdwtAZx/thumbs/thumb175x175.webp)
To descale your Krups BW399050 Kettle, fill the kettle with a mixture of half vinegar and half water. Let it sit for an hour, then boil the mixture and empty the kettle. Rinse thoroughly with fresh water to remove any vinegar residue.
Ensure that the kettle is properly connected to a power source and that the base is securely positioned. Check if there are any tripped circuit breakers or blown fuses in your home. If the problem persists, consult the user manual or contact customer support.
It is not recommended to boil milk in the Krups BW399050 Kettle as it can cause overflow and damage the heating element. Use the kettle only for boiling water.
To clean the exterior, use a damp cloth with mild detergent. Avoid using abrasive cleaners or scouring pads as they may scratch the surface. Make sure the kettle is unplugged and cool before cleaning.
Unusual noises can be caused by limescale build-up. Regular descaling can help reduce and eliminate these noises. If the issue continues after descaling, check if the kettle is on a stable surface and not vibrating during operation.
The Krups BW399050 Kettle has a minimum water level indicator. Ensure that the water level is above this mark before boiling to prevent damage to the heating element.
To prevent limescale build-up, regularly descale your kettle and use filtered water if possible. Empty the kettle after each use and allow it to dry with the lid open.
While it is safe to leave water in the kettle overnight, it is not recommended as it can lead to limescale build-up over time. It's best to empty the kettle after each use.
Boiling time may vary depending on the amount of water and its initial temperature. On average, it takes about 3 to 5 minutes to boil a full kettle of water.
Check if there is any obstruction preventing the lid from closing. Clean the lid and the rim of the kettle to ensure there is no debris. If the problem persists, inspect for any damage and contact customer service if necessary.