Korona 20402 Instruction Manual

To descale your Korona 20402 Kettle, fill it with a mixture of equal parts water and white vinegar. Boil the solution, let it sit for 30 minutes, then rinse thoroughly with water to remove any residue.
Ensure the kettle is properly plugged in and the power outlet is functioning. Check the power switch and make sure the kettle is seated correctly on its base. If the problem persists, consult the user manual for troubleshooting tips.
To clean the exterior, unplug the kettle and let it cool down. Wipe the surface with a damp cloth and mild detergent. Avoid using abrasive cleaners or immersing the kettle in water.
Yes, it's normal for the Korona 20402 Kettle to make some noise due to the heating element. If the noise seems excessive, check for scale buildup and descale if necessary.
Regularly descale your kettle using a vinegar solution. Empty the kettle after each use and allow it to dry completely to minimize limescale formation.
It is not recommended to boil milk in the kettle as it can cause damage and is difficult to clean. Use the kettle for boiling water only.
Locate the filter near the spout. Remove it carefully, clean or replace it as needed, and insert it back into place. Refer to the manual for specific instructions.
Check if the lid is securely closed and the kettle is properly positioned on its base. Ensure the water level is above the minimum mark. If issues persist, contact customer support.
Ensure the kettle is clean and dry before storing. Coil the power cord and place the kettle in a cool, dry place away from direct sunlight to prevent damage.
If the water tastes strange, clean the kettle thoroughly and descale it. Rinse well to remove any cleaning agent residue. Use filtered water to improve taste quality.