Korona 10101 Instruction Manual
![Korona 10101 Coffee Maker manual cover](/images/aLFpQqrxrjGTDYVrUvHmbkcH/thumbs/thumb175x175.webp)
To descale the Korona 10101 Coffee Maker, fill the water reservoir with a mixture of equal parts white vinegar and water. Run a brewing cycle without coffee grounds, and then run two more cycles with clean water to rinse.
Ensure the coffee maker is plugged in securely. Check the power outlet with another device to confirm it is working. If the problem persists, consult the user manual or contact customer service.
Remove the filter basket and wash it with warm, soapy water. Rinse it thoroughly and allow it to dry completely before reinserting it into the coffee maker.
A slow brew can be due to mineral build-up. Descale the machine as per the instructions to improve the flow rate. Ensure the coffee grounds are not too fine, as this can also affect brewing speed.
Yes, pre-ground coffee can be used. Place the desired amount into the filter basket and proceed with the brewing process as usual.
The recommended coffee-to-water ratio is about 1 to 2 tablespoons of coffee per 6 ounces of water, depending on your taste preference.
Refer to the user manual for detailed instructions. Typically, you will need to press the "Program" button, set the desired brew time using the hour and minute buttons, and confirm the setting.
Ensure you are using the correct coffee-to-water ratio. Check that the coffee grounds are not too coarse and adjust the grind size if necessary. Additionally, make sure the water is hot enough for brewing.
Some noise is normal as water is heated and pumped through the machine. However, if the noise is unusually loud or concerning, check for any blockages or contact customer support.
Replace the water filter every two months or after 60 brew cycles, whichever comes first, to ensure optimal performance and taste.