Korona 10112 Instruction Manual

To descale the Korona 10112 Coffee Maker, fill the water reservoir with a mixture of equal parts water and white vinegar. Run a brewing cycle without coffee grounds, then run two more cycles with clean water to rinse.
Ensure the coffee maker is plugged into a working outlet. Check if the power switch is on. If the issue persists, inspect the power cord for damage and contact customer support for further assistance.
To clean the coffee maker, remove the filter basket and carafe. Wash them with warm soapy water. Wipe the exterior with a damp cloth. Regularly clean the internal parts by running a cycle with water and vinegar.
Yes, you can use standard paper filters with the Korona 10112 Coffee Maker. Ensure the filter fits properly in the filter basket before brewing.
If the coffee is not hot enough, ensure the water reservoir is filled to the correct level and that the machine is fully preheated. Also, check that the warming plate is functioning properly.
To prevent coffee grounds from overflowing, do not overfill the filter basket. Ensure the filter is properly seated and do not use too fine a grind, which can lead to clogging.
A medium grind is recommended for the Korona 10112 Coffee Maker to ensure optimal brewing and to prevent clogging or overflow of the filter basket.
Refer to the user manual for programming instructions. Generally, you need to set the current time first, then set the desired brew time using the timer function on the control panel.
Ensure you are using fresh, quality coffee and that the machine is clean. Old coffee grounds or a dirty machine can impart unpleasant flavors. Regular descaling and cleaning are recommended.
Replace the water filter every two months or after approximately 60 brewing cycles to maintain coffee quality and machine performance.