Korona 20112 Instruction Manual
![Korona 20112 Kettle manual cover](/images/BqlhFBkhsftrtBEBlHCXihvO/thumbs/thumb175x175.webp)
To descale the Korona 20112 Kettle, fill it with a mixture of half water and half white vinegar. Boil the mixture, then let it sit for 15-20 minutes. Empty the kettle and rinse thoroughly with clean water. Repeat if necessary.
Ensure the kettle is properly connected to a power source and the power switch is in the 'on' position. Check if the lid is properly closed, as some models have a safety feature that prevents operation if the lid is not secure.
To clean the exterior, use a damp cloth with mild detergent. Avoid using abrasive cleaners, as they can damage the surface. Ensure the kettle is unplugged and dry before cleaning.
Yes, a slight plastic smell is normal when using the kettle for the first time. This should dissipate after a few uses. Boil water a couple of times and discard to help eliminate the odor.
Slow boiling can be due to a build-up of limescale. Descale the kettle to improve performance. Also, check if the power source is providing the correct voltage.
It is not recommended to boil milk in the kettle, as it can cause residue build-up and affect the kettle's performance. Use the kettle for boiling water only.
Regularly descaling the kettle and using filtered or soft water can help prevent limescale build-up. Empty the kettle after each use to reduce mineral deposits.
Check for any obstructions around the lid area. If there are none, inspect the hinge and latch mechanism for any damage. If the issue persists, contact customer support.
Ensure the kettle is completely dry before storing to prevent mold or mildew. Store it in a cool, dry place away from direct sunlight and moisture.
If the kettle leaks from the bottom, it may have a faulty seal or crack. Discontinue use immediately and contact customer support for repair or replacement options.