Korona 10310 Instruction Manual
![Korona 10310 Coffee Maker manual cover](/images/OTLRJdvbYAecxyvZCQIaZAFR/thumbs/thumb175x175.webp)
To descale the Korona 10310 Coffee Maker, fill the water reservoir with a mixture of half water and half white vinegar. Run a brew cycle without coffee grounds. After the cycle, rinse the machine by running two cycles with clean water.
Ensure the coffee maker is plugged in and the power switch is turned on. Check the circuit breaker or fuse box and reset if necessary. Verify that the water reservoir is properly seated and filled.
Remove the filter basket from the coffee maker. Rinse it under warm water to remove coffee grounds. Use a mild detergent and a soft brush if necessary. Rinse thoroughly and let it dry before reinserting.
A slow brewing process can be caused by a clogged filter or mineral deposits. Clean the filter and descale the coffee maker to improve brewing speed.
Yes, you can use paper filters if you prefer. Place the paper filter inside the permanent filter basket. This can make cleaning easier and reduce coffee grounds residue.
For optimal taste, use one to two tablespoons of coffee grounds per six ounces of water. Adjust the ratio according to your personal preference.
Replace the water filter every two months, or after 60 uses, to ensure the best tasting coffee and to maintain machine efficiency.
Ensure that you are not using too much coffee or brewing for too long. Clean the coffee maker regularly to remove old coffee oils that can affect taste.
Unplug the coffee maker for a few minutes, then plug it back in. Reset the clock and any other settings as needed.
Regularly clean the carafe, filter basket, and water reservoir. Descale the machine every 2-3 months and replace the water filter as recommended.