Korona 10100 Instruction Manual

To descale the coffee maker, fill the water reservoir with a mixture of equal parts water and white vinegar. Run a brew cycle without coffee grounds, then run two cycles with fresh water to rinse.
First, ensure the coffee maker is plugged into a working outlet. Check the power switch and ensure it is turned on. If it still doesn’t work, inspect the power cord for damage. If problems persist, contact customer support.
Use fresh, high-quality coffee beans and filtered water. Regularly clean and descale the coffee maker to prevent buildup that can affect flavor. Adjust the coffee-to-water ratio to suit your taste preferences.
Slow brewing may be due to mineral buildup. Descale the coffee maker to remove any deposits. Additionally, ensure the water reservoir is clean and the filter is not clogged.
Yes, brew a stronger batch of coffee and pour it over ice. Adjust the coffee-to-water ratio to ensure the flavor remains robust when diluted with ice.
Replace the filter every two months, or more frequently if you use the coffee maker daily. Check the filter for any signs of deterioration or clogging.
Wash the removable parts with warm soapy water. Run a brewing cycle with just water to clean the internal components. After this, the coffee maker is ready for use.
Ensure you are not exceeding the maximum water level in the reservoir and that the carafe is correctly positioned. Use the correct amount of coffee grounds as recommended in the manual.
Check if the water reservoir is seated properly and examine the gasket for damage. Ensure the carafe lid is closed correctly. If leaking persists, consult the user manual or contact customer support.
Yes, the Korona 10100 can use both permanent and paper filters. Follow the instructions in the manual for correct placement of the filter to ensure proper brewing.