KitchenAid KURL304ESS Energy Guide
![KitchenAid KURL304ESS Refrigerator manual cover](/images/PlbpdsPvNNDziuDWWXqliPyN/thumbs/thumb175x175.webp)
To change the water filter, locate it in the upper right corner of your refrigerator. Turn the filter counterclockwise to remove it, then insert the new filter and twist it clockwise until it clicks into place. Run water through the dispenser for several minutes to clear any air and impurities.
First, check the temperature settings to ensure they are set correctly. Make sure the vents inside the refrigerator are not blocked by food items. Clean the condenser coils at the back or bottom of the fridge. If the problem persists, consider contacting a professional technician.
To reset the control panel, unplug the refrigerator for 5 minutes. After plugging it back in, press the "Cooling" button to turn the cooling function back on. This should reset the panel.
The recommended temperature setting for optimal performance is 37°F (3°C) for the refrigerator compartment and 0°F (-18°C) for the freezer compartment.
To adjust the shelves, tilt the shelf up at the front and lift it out of the shelf supports. Reposition the shelf at the desired height and push it back into the supports. Make sure it is level and secure before placing items on it.
Unusual noises can be caused by several factors. Check to ensure the refrigerator is level and stable on the floor. Noises can also occur if items are vibrating on the shelves. Additionally, the compressor and fans can make sounds that are normal, but if the noise is excessive, a technician may need to inspect it.
Unplug the refrigerator and locate the condenser coils at the back or the bottom. Use a vacuum with a brush attachment to gently remove dust and debris. For thorough cleaning, use a coil cleaning brush. Regular cleaning is recommended for optimal performance.
Ensure the ice maker is turned on and the water supply line is connected. Check for any ice blockages in the ice tray. If the issue persists, resetting the ice maker by turning it off and then on again may help. Consult the user manual for specific instructions.
To replace the LED light, unplug the refrigerator and locate the light cover. Use a screwdriver to remove the cover, then carefully remove the old LED light. Insert the new LED light and replace the cover. Plug the refrigerator back in to test the light.
Regular maintenance includes cleaning the condenser coils, checking and replacing the water filter every 6 months, ensuring door seals are clean and intact, and periodically checking the temperature settings. Keeping the interior clean and organized also helps maintain efficiency.