KitchenAid KRFC704FBS Energy Guide
![KitchenAid KRFC704FBS Refrigerator manual cover](/images/YIXEDXQaMAFerIVOqSDOAqcv/thumbs/thumb175x175.webp)
To reset the water filter indicator, press and hold the "FILTER RESET" button for 3 seconds until the indicator light turns off.
Ensure that the refrigerator is plugged in and that the temperature controls are set correctly. Check for blocked air vents and ensure that the door is sealing properly.
Unplug the refrigerator and locate the condenser coils, usually at the back or bottom. Use a vacuum cleaner with a brush attachment to remove dust and debris.
Excessive frost can be caused by a faulty door seal or frequent door openings. Check the gasket for damage and ensure the door is closing completely.
To replace the LED light, unplug the refrigerator, remove the light cover, and replace the faulty bulb with a new one of the same type and wattage.
Ensure the ice maker is turned on and that the water supply line is connected. Check for ice blockages in the ejector arm and see if the water filter needs replacing.
Clean spills immediately, store food in airtight containers, and place an open box of baking soda inside to absorb odors.
Locate the temperature control panel inside the refrigerator. Use the buttons to adjust the settings to your desired levels, typically 37°F for the fridge and 0°F for the freezer.
It is not recommended to install the refrigerator near heat sources such as ovens or dishwashers, as this can affect its efficiency and cooling performance.
To defrost, remove all items from the freezer, unplug the refrigerator, and leave the freezer door open. Use towels to absorb water and clean the interior once defrosting is complete.