Karcher S15 1.012-616.0 Instructions Manual
![Karcher S15 1.012-616.0 manual cover](/images/b858478a605e360ba8778962/thumbs/thumb175x175.webp)
To assemble the Karcher S15, start by attaching the handle to the main unit. Ensure all screws are tightened securely. Install the side brushes by aligning and pressing them into the designated sockets on the underside.
First, check the power connection and ensure the outlet is working. Inspect the power cord for any damage. Verify that the main switch is in the 'ON' position. If it still does not start, consult the user manual for further troubleshooting steps.
Regularly inspect the side and main brushes for wear and tear. Clean them after each use to remove debris. Replace brushes when bristles are worn down to ensure effective cleaning performance.
For optimal performance, use the Karcher S15 regularly to prevent debris build-up. After each use, empty the waste container, clean the brushes, and store the machine in a dry location.
The Karcher S15 features adjustable height settings to accommodate different surfaces. Locate the adjustment lever on the machine and set it to the desired height, ensuring it is locked in place before operation.
The Karcher S15 is designed for dry sweeping. Using it on wet surfaces may damage the machine and reduce its effectiveness. Ensure surfaces are dry before operating the sweeper.
If performance is reduced, check for blockages in the air channels or brushes. Ensure the waste container is not full and the brushes are not worn out. Clean or replace components as needed.
Filters should be checked monthly and replaced if they appear clogged or damaged. Regular replacement ensures optimal dust capture and machine performance.
Store the Karcher S15 in a clean, dry area. Ensure the machine is turned off and unplugged. Keep it away from direct sunlight and extreme temperatures to prolong its lifespan.
To clean the waste container, remove it from the machine and empty any debris. Wash with water and mild detergent, then allow it to dry completely before reattaching it to the machine.