Karcher BD 38 12 C Bp Instructions Manual
![Karcher BD 38 12 C Bp manual cover](/images/7ae6b3eefb454bd29a753059/thumbs/thumb175x175.webp)
To charge the battery, connect the charger to the power source and plug it into the charging port of the BD 38/12 C Bp. Ensure the charger indicator light is on, indicating the battery is charging. Fully charge the battery before first use or when the battery is low.
Check if the brush or pad is worn out and replace it if necessary. Ensure that the brush or pad is correctly installed and that the solution tank is filled with the appropriate cleaning solution.
Regularly clean the machine after use, including the recovery tank, squeegee, and brush. Check and clean the solution filter periodically. Store the machine in a dry, clean area.
Ensure the battery is fully charged and correctly connected. Check for any blown fuses or tripped circuit breakers. Inspect the power switch for any signs of damage.
To replace the squeegee blades, remove the squeegee assembly by loosening the retaining screws. Slide out the old blades and insert the new ones, ensuring they are aligned correctly. Reattach the squeegee assembly and tighten the screws.
Detach the recovery tank from the machine and pour out the dirty water. Rinse the tank with clean water and check for any debris. Ensure the float valve and filter are clean before reattaching the tank.
Streaks may occur if the squeegee blades are worn or damaged. Check the blades and replace them if needed. Ensure the squeegee is adjusted correctly and the cleaning solution is suitable for the floor type.
Yes, the BD 38/12 C Bp is suitable for various hard floor surfaces. Always select appropriate brushes or pads and cleaning solutions for the specific floor type to avoid damage.
Check if the solution tank is empty and refill if necessary. Inspect the solution filter and hoses for blockages. Ensure the solution control valve is functioning correctly.
Use cleaning solutions recommended by Karcher, designed for use with floor scrubbers. Avoid using highly foaming or corrosive cleaners to prevent damage to the machine.