Karcher PS 4 7 Bp OBC Mister 1.007-084.0 Instructions Manual
![Karcher PS 4 7 Bp OBC Mister 1.007-084.0 manual cover](/images/5e481979775c8eea7a466b93/thumbs/thumb175x175.webp)
To properly charge the battery, connect the charger to the charging port located on the unit. Ensure the charger is plugged into a standard electrical outlet. The indicator light will show red while charging and turn green when fully charged.
First, check that the tank contains liquid and the nozzle is not clogged. Clean the nozzle if necessary. Ensure the battery is charged and the power switch is on. If the issue persists, consult the troubleshooting section of the user manual.
Regularly clean the nozzle using a soft brush and warm water to remove any residue or buildup. Avoid using harsh chemicals that may damage the nozzle components.
Before storage, empty the tank and clean it thoroughly. Charge the battery to about 50% if storing for an extended period. Store the unit in a cool, dry place away from direct sunlight.
The battery may need replacement if it no longer holds a charge or if the runtime is significantly reduced. Check the battery health using a multimeter or consult a professional for testing.
Always wear appropriate personal protective equipment, such as gloves and goggles. Ensure the work area is well-ventilated. Follow all instructions in the user manual for safe operation.
Inspect the tank for visible cracks or damage. Check that all seals and gaskets are intact and properly seated. Tighten any loose connections. If the leak persists, replacement of the tank may be necessary.
Only use cleaning solutions recommended by Karcher. Using incompatible solutions may damage the unit and void the warranty. Refer to the user manual for a list of approved solutions.
Perform regular cleaning of the tank and nozzle, check for any loose or damaged parts, and ensure the battery is charged and functioning properly. Periodically inspect hoses and connections for wear and tear.
Adjust the spray pattern by turning the nozzle tip. Test the spray on a safe surface to ensure the desired pattern is achieved. Make sure adjustments are made while the unit is powered off.