Karcher BD 50 50 C Bp Pad AGM 1.127-030.0 Instructions Manual

To start the Karcher BD 50/50 C Bp, first ensure the battery is charged and connected. Turn the key to the 'ON' position, check the water and detergent levels, and release the parking brake. Adjust the squeegee and brush settings before operating.
If the Karcher BD 50/50 C Bp is not picking up water, check if the squeegee is properly adjusted and clean. Inspect the vacuum hose for blockages and ensure the recovery tank is not full.
Regular maintenance should be performed daily, including cleaning the squeegee, brushes, and tanks. Weekly checks should include inspecting the battery and connections, while monthly maintenance involves a thorough inspection of all moving parts.
It is recommended to use detergents specifically designed for floor scrubbers. Avoid using high-foaming detergents or those not recommended by Karcher to prevent damage to the machine.
The Karcher BD 50/50 C Bp uses an AGM (Absorbent Glass Mat) battery. To maintain it, keep the battery charged, avoid deep discharges, and ensure the terminals are clean and free from corrosion.
If the machine won't start, check the battery charge and connections. Ensure the key switch is turned on and the emergency stop button is disengaged. Inspect all fuses and replace any that are blown.
If the brushes are not rotating, check for blockages or tangled debris. Inspect the drive belt for wear and replace it if necessary. Ensure the brush motor is functioning correctly.
To adjust the squeegee, ensure the machine is on a level surface. Loosen the adjustment knobs and set the squeegee to the desired position, ensuring even contact with the floor. Tighten the knobs to secure it.
For optimal performance, use a systematic cleaning path, such as overlapping passes, to ensure full coverage and avoid missing spots. Adjust the machine speed to match floor conditions.
When storing the machine, ensure it is clean and dry. Disconnect the battery, store it in a cool, dry place, and elevate the squeegee and brushes to prevent deformation. Store the machine in a location protected from extreme temperatures.