JVC LT-24C360(B) Instruction Manual

To connect your JVC LT-24C360(B) TV to Wi-Fi, access the 'Menu' then navigate to 'Network Settings'. Select 'Wireless' and choose your Wi-Fi network from the list. Enter the password and confirm to connect.
Check the HDMI connection and ensure that the cables are securely plugged in. Try changing the input source or performing a factory reset from the settings menu. If the issue persists, contact JVC support.
To update the firmware, go to the 'Menu', select 'System', and then 'Software Update'. Choose 'Check for Updates' and follow the on-screen instructions to install any available updates.
Ensure the remote has fresh batteries and is pointed directly at the TV sensor. Try pressing the power button on the TV directly. If it turns on, the remote may need to be paired again or replaced.
To perform a factory reset, press 'Menu' on your remote, navigate to 'Setup', and select 'Reset'. Confirm the reset by following the on-screen instructions.
The JVC LT-24C360(B) does not support Bluetooth connectivity for headphones. You can use a wired connection through the headphone jack or purchase an external Bluetooth transmitter.
Access the 'Menu', go to 'Picture Settings', and adjust parameters like brightness, contrast, color, and sharpness to your liking. Use preset modes for quick adjustments.
Check the volume level and ensure the TV is not muted. Verify audio output settings in the menu and check external connections if using external speakers.
To set up parental controls, access the 'Menu', choose 'Setup', and navigate to 'Parental Controls'. Set a PIN and configure restrictions based on your preferences.
The JVC LT-24C360(B) is compatible with VESA 100x100mm wall mounts. Ensure the mount supports the TV's weight and follow the installation instructions for secure mounting.