JennAir Rise JFFCF72DKL Owner Manual

To change the water filter, locate it inside the refrigerator compartment. Twist the old filter counterclockwise to remove it. Insert the new filter, aligning the grooves, and turn it clockwise until it locks into place. Run water through the dispenser for 2-3 minutes to clear any air and impurities.
First, check if the temperature settings are correct. Ensure that the vents inside the refrigerator and freezer are not blocked. Clean the condenser coils located at the back or bottom of the fridge. If the problem persists, consider contacting a professional technician.
To reset the ice maker, locate the reset button, usually found at the bottom or side of the ice maker unit. Press and hold the button for about 10 seconds or until you hear a chime. This will initiate a reset cycle.
It's recommended to clean the condenser coils every 6 months, replace the water filter every 6 months, and check and clean the door seals annually. Regularly defrost the freezer if it isn't frost-free.
Keep the refrigerator clean by wiping spills immediately and regularly checking for expired or spoiled food. Use baking soda or a commercial deodorizer to absorb odors. Ensure proper air circulation by not overloading shelves.
Normal noises include humming of the compressor, clicking when the defrost cycle starts, and occasional popping or cracking as the interior cools. However, loud buzzing or grinding sounds may require service.
Use a soft cloth with mild soap and water to clean the surface. Dry with a separate soft cloth to avoid streaks. To maintain shine, you may use a stainless steel cleaner or polish. Avoid abrasive cleaners or scouring pads.
Ensure the ice maker is turned on and the water supply is connected. Check for any kinks in the water line. Verify that the freezer temperature is set between 0°F and 5°F. If the issue persists, inspect for blockages or contact customer support.
Keep the refrigerator and freezer doors closed as much as possible. Ensure door seals are clean and form a tight seal. Set the temperature to the recommended settings: 37°F for the refrigerator and 0°F for the freezer. Keep the appliance in a well-ventilated area.
To level your refrigerator, locate the leveling legs at the front. Use a wrench to adjust the legs—turn clockwise to raise the unit and counterclockwise to lower it. Ensure the refrigerator is level from side to side and front to back for optimal performance.