JennAir Noir JMC6224HM Owner Manual
![JennAir Noir JMC6224HM Oven manual cover](/images/uwppWcXhabVlpSrFkcumIfIn/thumbs/thumb175x175.webp)
To set the convection mode, press the 'Convect' button on the control panel, select the desired temperature using the number pad, and then press 'Start'.
Ensure the oven is plugged in and the circuit breaker is not tripped. If the issue persists, check the oven's temperature settings and make sure the door is fully closed. If the problem continues, contact JennAir customer service.
Use a damp cloth with mild soap to wipe the interior. For tougher stains, apply a baking soda paste and let it sit for 15 minutes before wiping clean. Avoid using abrasive cleaners or scouring pads.
Unusual noises can be caused by the oven rack or cookware vibrating. Ensure that racks are properly positioned and cookware is evenly distributed. If the noise persists, it may be due to the convection fan or other mechanical issues, which would require professional inspection.
To initiate a self-cleaning cycle, remove all racks and accessories from the oven. Press 'Clean', select the desired cleaning level, and press 'Start'. The oven will lock and start the cycle. Ensure the kitchen is well-ventilated during this process.
The oven door will remain locked until it cools down. If it still does not open after cooling, check the lock mechanism for obstructions. If necessary, perform a power reset by unplugging the oven or turning off the circuit breaker for a few minutes.
Aluminum foil can be used to line baking sheets or cover food. However, do not cover oven racks or the oven bottom with foil, as this can affect heat circulation and potentially cause damage.
To replace the oven light bulb, ensure the oven is unplugged and cool. Remove the glass light cover by turning it counterclockwise. Replace the bulb with a new 40-watt appliance bulb and reattach the cover.
Check if the oven is properly connected to the power supply. If it is, try resetting the oven by unplugging it or switching off the circuit breaker for a few minutes. If the issue persists, contact JennAir support for assistance.
To calibrate the oven temperature, press 'Settings' and select 'Calibration'. Follow the on-screen prompts to adjust the temperature calibration. If you are unsure, refer to the user manual or consult a professional technician.