JennAir Noir JUGFL242HM Owner Manual
![JennAir Noir JUGFL242HM Refrigerator manual cover](/images/QftJncytUKsClMouradDIZXB/thumbs/thumb175x175.webp)
To adjust the temperature settings, use the control panel located inside the refrigerator. Press the 'Temperature' button to toggle between the fridge and freezer settings, and use the '+' or '-' buttons to adjust the temperature as desired.
Unusual noises can be caused by a variety of factors. First, ensure the refrigerator is level. Check for loose items inside that may be vibrating. If the noise persists, verify that the condenser fan and compressor are functioning properly. Consult the manual for further troubleshooting or contact customer support.
To change the water filter, locate the filter compartment inside the refrigerator. Turn the filter counterclockwise to remove it. Insert a new filter and turn it clockwise until it locks in place. Run water through the dispenser for a few minutes to purge air and contaminants.
If your refrigerator isn't cooling, check the temperature settings and ensure the doors are sealing properly. Clean the condenser coils if they are dirty. If the issue persists, there might be a problem with the evaporator fan or compressor, which might require professional service.
To activate Sabbath Mode, press and hold the 'Light' and 'Lock' buttons simultaneously for 3 seconds. The control panel will display 'SAb' indicating that the mode is active. To deactivate, repeat the process.
Yes, the door swing can be reversed. Refer to the installation instructions provided with your refrigerator. Ensure you have the necessary tools and follow the step-by-step guide. If unsure, consider hiring a professional to perform the task.
Regular maintenance includes cleaning the condenser coils every 6 months, checking and replacing the water filter as needed, ensuring door seals are clean and tight, and inspecting the drip pan for any leaks or buildup.
To reset the control panel, unplug the refrigerator for about 5 minutes and then plug it back in. This should reset the system. If issues persist, consult the user manual or contact customer support for further assistance.
Condensation can occur if the refrigerator door is frequently opened or not closed properly. Ensure the door seals are intact and clean. Adjust the humidity settings if available, and avoid placing hot food inside the refrigerator.
To replace the LED light, first unplug the refrigerator. Locate the light cover, typically situated at the top of the compartment. Remove the cover by unscrewing or unclipping it. Replace the old LED with a new one and reattach the cover. Plug the refrigerator back in.