JennAir Noir JMDFS24HM Installation Instructions
![JennAir Noir JMDFS24HM Microwave manual cover](/images/xoubENKkjHzLjoXsoQOOCZkn/thumbs/thumb175x175.webp)
To set the power level, press the 'Power Level' button and use the numeric keypad to enter the desired level from 1 to 10. Confirm your selection by pressing 'Start'.
To clean the interior, use a soft cloth with mild detergent and water. Avoid abrasive cleaners or scrubbing pads. Ensure the microwave is unplugged before cleaning.
Check if the door is fully closed and the timer is set correctly. Ensure the microwave is not in 'Demo Mode'. If the issue persists, consult the user manual or contact customer support.
Verify that the microwave is plugged in and that the circuit breaker is not tripped. If the display is still not working, a service technician may need to inspect the unit.
To use the convection feature, press the 'Convection' button, set the desired temperature, and press 'Start'. Preheat if required before adding food.
Metal containers should not be used in the microwave mode as they can cause arcing. They can be used in convection mode if the microwave's manual indicates it is safe.
The charcoal filter should be replaced every 6 to 12 months, depending on usage. Refer to the user manual for specific instructions on replacing the filter.
Immediately turn off and unplug the microwave. Inspect for any burnt food or debris. If the smell persists after cleaning, contact a service technician.
Press the 'Defrost' button and enter the weight of the food item. The microwave will automatically set the defrosting time. Press 'Start' to begin.
To reset, unplug the microwave from the power outlet, wait for about 10 seconds, and then plug it back in. This can help clear minor electronic glitches.