JennAir JB36NXFXLE Installation Instructions
![JennAir JB36NXFXLE Refrigerator manual cover](/images/sALIxnccFjaqTIZOhNiVMGmU/thumbs/thumb175x175.webp)
To reset the water filter indicator, locate the reset button on the control panel. Press and hold the button for 3 seconds until the indicator light turns off.
Check if the refrigerator is properly plugged in and ensure the circuit breaker hasn't tripped. Verify that the temperature settings are correct. If the issue persists, consult the user manual or contact customer support.
It's recommended to clean the condenser coils every 6 to 12 months to ensure efficient operation. Use a vacuum or a brush to remove dust and debris.
Yes, the door swing direction can be changed. Refer to the installation instructions in your user manual for detailed steps on reversing the door swing.
Check if the refrigerator is level and stable on the floor. Ensure nothing inside is vibrating against the walls. If the noise continues, it could be a sign of a mechanical issue requiring professional service.
Ensure the ice maker is turned on and the water supply is connected. Check for any ice jams and clear them. If the problem persists, inspect the water filter and replace it if necessary.
Remove all food items and shelves. Use a solution of mild detergent and warm water to wipe down the interior surfaces. Rinse with clean water and dry with a soft cloth before replacing shelves and food items.
Ensure the refrigerator door seals are clean and tight. Keep the refrigerator away from heat sources like ovens or direct sunlight. Regularly clean the condenser coils and avoid overloading the refrigerator.
Check if the defrost drain is clogged and clear any blockages. Ensure that the water filter is installed correctly. If the leak persists, inspect the water line and connections for damage.
Unplug the refrigerator and locate the light bulb cover inside. Remove the cover by unscrewing or unclipping it, depending on the model. Replace the bulb with a new one of the same type and wattage, then reattach the cover.