Jeep Grand Cherokee SRT 2019 Quick Reference Guide
![Jeep Grand Cherokee SRT 2019 SUV manual cover](/images/mZXfvZtGLHMhMVqDgamBCQAJ/thumbs/thumb175x175.webp)
To reset the oil change indicator, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal slowly three times within 10 seconds. Turn the ignition to the "OFF" position. The indicator should be reset.
The 2019 Jeep Grand Cherokee SRT is designed to run on premium unleaded gasoline with an octane rating of 91 or higher for optimal performance.
To pair your smartphone, enable Bluetooth on your phone. On the Uconnect system, select “Phone” > “Add Device.” Select your phone from the list and confirm the PIN on both devices.
The towing capacity of the 2019 Jeep Grand Cherokee SRT is up to 7,200 pounds when properly equipped.
The 2019 Jeep Grand Cherokee SRT features a sealed transmission system. Checking the fluid level requires special tools and is best done by a professional technician.
The recommended tire pressure for the 2019 Jeep Grand Cherokee SRT is typically 36 PSI for both front and rear tires. Always refer to the placard on the driver's side door for exact specifications.
To perform a factory reset, press the Phone and VR buttons on the steering wheel for 30 seconds. Turn off the ignition, open the door, and wait for the Uconnect screen to go black. Close the door and restart the vehicle.
Yes, a roof rack can be installed on the 2019 Jeep Grand Cherokee SRT. The maximum load for the roof rack is generally around 150 pounds. Always check the specific roof rack's manual for precise limits.
If the key fob is not detected, first replace the battery in the fob. If the problem persists, try placing the fob closer to the start button or use the fob's emergency key to start the vehicle.
Brake fluid in a 2019 Jeep Grand Cherokee SRT should be changed approximately every two years or as specified in the owner’s manual. Regular inspections will help ensure proper maintenance intervals.