Jeep Compass 2019 Quick Reference Guide
![Jeep Compass 2019 SUV manual cover](/images/nzPsCHDxhdIkrcLihtfiHSeC/thumbs/thumb175x175.webp)
To reset the oil change light on your 2019 Jeep Compass, switch the ignition to the "ON" position without starting the engine. Press the gas pedal slowly three times within 10 seconds. Turn the ignition off and then start the engine to ensure the light has been reset.
The 2019 Jeep Compass typically requires 0W-20 or 5W-30 synthetic oil, depending on your engine type and climate conditions. Always refer to your owner’s manual for the recommended oil viscosity and specifications.
To improve fuel efficiency, ensure your tires are properly inflated, follow regular maintenance schedules, drive at steady speeds, and reduce unnecessary weight in your vehicle. Additionally, using cruise control on highways can help maintain consistent speed and improve fuel economy.
Common reasons for the check engine light to appear include a loose gas cap, faulty oxygen sensor, malfunctioning catalytic converter, or issues with the spark plugs. It's advisable to use an OBD-II scanner to diagnose the specific issue.
To pair your phone with the Uconnect system, ensure Bluetooth is enabled on your phone. On the Uconnect screen, go to "Phone" > "Add Device" and select your phone from the list. Confirm the pairing code on both devices to complete the connection.
The recommended tire pressure for the 2019 Jeep Compass is typically 35 PSI for both front and rear tires. Always verify with the tire information placard located on the driver’s side door jamb.
To change the cabin air filter, open the glove box and remove the limiting arm. Squeeze the sides of the glove box to drop it down. Remove the cabin air filter cover, slide out the old filter, and replace it with a new one, ensuring the airflow direction is correct.
A squealing noise when braking is often due to worn brake pads. It is advisable to inspect the brake pads and replace them if they are worn down to avoid damage to the rotors.
To enable the 4WD Lock on your 2019 Jeep Compass, press the "4WD Lock" button located on the dashboard or center console. This feature is beneficial in low-traction conditions by engaging all four wheels for improved stability.
The 2019 Jeep Compass has a maximum towing capacity of up to 2,000 pounds when properly equipped with the towing package. Verify your specific vehicle configuration for exact towing specifications.