Jeep Gladiator 2020 Quick Reference Guide

Jeep Gladiator 2020 Truck manual cover
Pages 28
Year 2020
Language(s)
English en

Jeep Gladiator 2020 Truck Specification

The 2020 Jeep Gladiator is a distinctive mid-size pickup truck that blends the rugged off-road capability of the Jeep Wrangler with the utility and versatility of a truck. It is powered by a 3.6-liter Pentastar V6 engine, delivering 285 horsepower and 260 lb-ft of torque, paired with either a six-speed manual transmission or an eight-speed automatic transmission. The Gladiator boasts a best-in-class towing capacity of 7,650 pounds and a maximum payload of 1,600 pounds, making it a formidable choice for both work and play.

The design of the Gladiator features the iconic seven-slot grille, removable doors, and a fold-down windshield, maintaining the classic Jeep aesthetic. The truck bed measures five feet and includes an available spray-in bed liner, LED lighting, and a power-locking tailgate. Inside, the Gladiator offers a spacious cabin with modern amenities such as the Uconnect infotainment system with a 7-inch or optional 8.4-inch touchscreen, Apple CarPlay, Android Auto, and available navigation.

Off-road enthusiasts will appreciate the Gladiator's Trail Rated badge, which signifies its ability to perform in various challenging conditions. It includes features like skid plates, heavy-duty axles, and up to 11.1 inches of ground clearance. The Rubicon trim level further enhances its off-road prowess with 33-inch all-terrain tires, electronic sway bar disconnect, and front and rear locking differentials.

Safety features in the 2020 Jeep Gladiator include adaptive cruise control, forward collision warning, blind-spot monitoring, and rear cross-path detection. The combination of its robust powertrain, versatile design, advanced technology, and off-road capabilities makes the Jeep Gladiator a unique and capable vehicle in the mid-size truck segment.

Jeep Gladiator 2020 Truck F.A.Q.

How do I engage the 4WD system on my 2020 Jeep Gladiator?

To engage the 4WD system, bring the vehicle to a stop, shift the transmission into neutral, and then move the 4WD lever to the desired position (4H for high range or 4L for low range). Once engaged, shift the transmission back into drive.

What is the recommended tire pressure for the 2020 Jeep Gladiator?

The recommended tire pressure for the 2020 Jeep Gladiator is typically 37 psi for both front and rear tires. However, always check the placard on the driver's side door jamb for the most accurate information.

How often should I change the oil in my 2020 Jeep Gladiator?

It is recommended to change the oil every 3,000 to 5,000 miles, depending on your driving conditions and oil type. Regular checking and adhering to the maintenance schedule in the owner's manual is advised.

What type of oil should I use for my 2020 Jeep Gladiator?

The 2020 Jeep Gladiator typically requires 0W-20 full synthetic oil. Always check your owner's manual for the specific requirements for your engine variant.

How can I reset the maintenance required light on my 2020 Jeep Gladiator?

To reset the maintenance required light, turn the ignition to the ON position without starting the engine, press the gas pedal slowly three times, and then turn the ignition off. Start the engine to confirm the reset.

What should I do if my 2020 Jeep Gladiator won't start?

If your Gladiator won't start, check the battery connections, ensure the battery is charged, and verify the key fob is functioning. If the issue persists, consult a professional mechanic.

How do I pair my smartphone with the Uconnect system in my 2020 Jeep Gladiator?

To pair your smartphone, enable Bluetooth on your device, press the Phone button on the Uconnect system, and follow the prompts to add a device. Select your phone from the list and confirm the PIN displayed matches.

What towing capacity does the 2020 Jeep Gladiator offer?

The 2020 Jeep Gladiator has a towing capacity of up to 7,650 pounds when properly equipped. Always ensure your vehicle setup matches the towing requirements.

How do I remove the doors and roof from my 2020 Jeep Gladiator?

To remove the doors, disconnect the wiring harness, remove the door hinge bolts, and lift the doors off. For the roof, detach the latches and lift off the panels. Refer to the owner’s manual for specific instructions and safety guidelines.

What are common reasons for the check engine light to come on in a 2020 Jeep Gladiator?

Common reasons include a loose gas cap, faulty oxygen sensor, malfunctioning catalytic converter, or ignition system issues. A diagnostic scan tool can help identify the specific problem.