ION Solar Stone Multi Quickstart Guide
![ION Solar Stone Multi manual cover](/images/QjpIrjUFjjwJCVSujhPpPNwY/thumbs/thumb175x175.webp)
To pair your ION Solar Stone Multi Speaker with a Bluetooth device, turn on the speaker and enable Bluetooth pairing mode. On your Bluetooth device, search for available devices and select "ION Solar Stone Multi". Once connected, you should hear a confirmation tone.
Ensure that the charging cable is properly connected to both the speaker and a power source. Check the power outlet and try a different USB cable or charger if necessary. If the issue persists, inspect the charging port for debris or damage.
Yes, the ION Solar Stone Multi Speaker is designed to be weather-resistant and can be used in light rain. However, it is not fully waterproof, so avoid submerging it in water or exposing it to heavy rain.
To reset the speaker to factory settings, turn it off and press and hold the Bluetooth and Play/Pause buttons simultaneously for about 10 seconds until you hear a confirmation tone. This will clear paired devices and reset settings.
To clean your speaker, use a soft, damp cloth to gently wipe the exterior. Avoid using harsh chemicals or submerging the speaker in water. Make sure all ports are closed to prevent moisture from entering.
To optimize battery life, keep the speaker fully charged when not in use, avoid extreme temperatures, and reduce volume levels when possible. Regularly charging the speaker even when not in use can also help maintain battery health.
If the sound is distorted, check the speaker's battery level and charge if necessary. Ensure the Bluetooth connection is strong by minimizing obstructions and maintaining proximity to the paired device. Lower the volume on your device or the speaker to see if distortion decreases.
Yes, you can connect two ION Solar Stone Multi Speakers for stereo sound. Follow the instructions in the user manual to pair them together, typically by pressing a specific button combination on both speakers.
Check the ION Audio website for any firmware updates available for your speaker model. Follow the instructions provided to download and install the update, usually involving a USB connection to a computer.
If your speaker is automatically turning off, it could be due to a low battery or the auto-off feature. Ensure the speaker is fully charged and check if the auto-off setting can be adjusted or disabled in the settings menu or user manual.