ION Pro Glow 1500 Quickstart Guide

To pair your ION Pro Glow 1500 Speaker with a Bluetooth device, first ensure the speaker is powered on. Press the Bluetooth button to enter pairing mode. Enable Bluetooth on your device and search for available devices. Select 'ION Pro Glow 1500' from the list.
If your speaker isn't powering on, check if it's connected to a power source and the power switch is on. If it still doesn't power on, try a different outlet or charging cable. If the issue persists, contact ION support.
To reset your speaker, turn it off, then press and hold the Bluetooth and Volume + buttons simultaneously for about 10 seconds until you hear a tone. This will reset the speaker to factory settings.
To clean your speaker, use a soft, damp cloth to wipe the exterior. Avoid using harsh chemicals or immersing in water. Regularly check for dust in the speaker grills and remove with a soft brush.
To enhance battery life, charge your speaker fully before initial use. Avoid extreme temperatures and do not overcharge. When not in use, power off the speaker to conserve battery.
Connect a microphone to the Mic Input on the speaker using a compatible cable. Adjust the microphone volume using the dedicated control knob to achieve the desired sound level.
Yes, you can use the speaker while it's charging. However, it is recommended to avoid prolonged use during charging to maintain battery health.
First, check the volume levels on both the speaker and the connected device. Ensure the correct input source is selected. If connected via Bluetooth, make sure the device is within range.
To update the firmware, visit the ION Audio website to check for available updates. Follow the instructions provided for downloading and installing the update onto your speaker.
Store your speaker in a cool, dry place away from direct sunlight. Ensure it is powered off and disconnected from any power source. Cover it to protect from dust if possible.