ION Game Day Party Quickstart Guide
![ION Game Day Party manual cover](/images/BKUZAqfhdgXgNRbZNRUGfdEe/thumbs/thumb175x175.webp)
To connect your device via Bluetooth, first ensure the speaker is powered on. Then, enable Bluetooth on your device and search for available devices. Select 'ION Game Day' from the list and pair it.
If the speaker is not turning on, check if it is properly charged. Connect it to a power source and ensure the charging indicator is lit. If the issue persists, try resetting the speaker by holding down the power button for 10 seconds.
To reset the speaker to factory settings, press and hold the Volume + and Bluetooth buttons simultaneously for about 10 seconds until you see the LED lights flash.
Distorted sound can be due to low battery. Ensure the speaker is fully charged. Additionally, check the audio source volume and reduce it if necessary. Make sure there are no obstructions between the speaker and the audio source.
Yes, the ION Game Day Party Speaker can be used while charging. However, it's recommended to ensure a stable power connection to avoid interruptions during playback.
The speaker's charging indicator will change from red to green when the battery is fully charged. It is recommended to disconnect the charger once fully charged to prolong battery life.
To improve Bluetooth range, ensure there are no obstacles like walls or metal objects between your device and the speaker. Keep them within the recommended range, usually up to 30 feet, and avoid interference from other wireless devices.
Use a soft, dry cloth to clean the exterior of the speaker. Avoid using solvents or abrasive materials. Ensure the speaker is turned off and disconnected from any power source before cleaning.
If the speaker is not connecting automatically, ensure that your device's Bluetooth is turned on and within range. The speaker might need to be paired manually if it has been connected to another device recently.
The ION Game Day Party Speaker supports a single Bluetooth connection at a time. To switch devices, disconnect the current device before connecting a new one.