Intex Krystal Clear 603 User Manual

Start by laying out all the parts. Attach the pump hoses to the pool, ensuring they are tightly secured. Then, connect the hoses to the pump. Fill the pump with water to prime it before plugging it into a power source.
Check the power source and ensure the pump is properly plugged in. Examine the circuit breaker and reset it if necessary. Also, inspect the impeller for obstructions and clear any debris.
Clean the filter cartridge at least once a week. Rinse it with a hose to remove debris and dirt. Replace the cartridge every 2 weeks or when it becomes visibly worn.
Loud noises can be caused by air in the system. Ensure that all connections are tight and there are no leaks. Check for debris in the impeller and clean it if necessary.
Disconnect and drain all hoses. Remove the pump and store it indoors in a dry, warm place. Clean the filter cartridge and store it separately. Ensure all parts are dry to prevent freezing damage.
Check and clean the filter cartridge weekly. Inspect hoses and connections for leaks every few days. Perform a thorough cleaning of the pump and filter system at the start and end of the swimming season.
It is generally not recommended to run the pump continuously. Run it for about 8-12 hours a day, depending on pool usage and size, to ensure adequate circulation and filtration.
Check for clogged or dirty filter cartridges and clean or replace them as needed. Ensure that all valves are open and that there are no blockages in the hoses or intake.
Regularly clean the filter cartridge and ensure there are no air leaks in the system. Position the pump on a stable, level surface to reduce vibration and noise.
The Intex Krystal Clear 603 pump typically uses Type A filter cartridges. Always ensure you use the correct type for optimal performance and fit.