Intempo EE5095YBLKSTKEU7V2 Bluetooth Instruction Manual

To pair your headphones, turn on the Bluetooth function on your device. Then, press and hold the power button on the headphones until the LED indicator flashes blue and red. Select "Intempo EE5095YBLKSTKEU7V2" from the list of available devices on your device.
Ensure that the headphones are in pairing mode and that Bluetooth is enabled on your device. Try restarting both the headphones and your device. If the issue persists, remove the headphones from your device's paired list and attempt the pairing process again.
To reset your headphones, turn them off, then press and hold the power button for about 10 seconds until the LED indicator flashes. This will clear all paired devices and restore factory settings.
Use the provided USB cable to connect the headphones to a power source. The LED indicator will show red while charging and will turn off once fully charged.
Poor sound quality can be due to low battery, interference from other devices, or a weak Bluetooth connection. Ensure the headphones are fully charged, move closer to the connected device, and avoid obstacles between the headphones and the device.
To extend battery life, avoid exposing the headphones to extreme temperatures, use them at moderate volume levels, and recharge them before they are completely drained.
It is not recommended to use the headphones while charging as it may affect battery performance and longevity.
The Bluetooth range for these headphones is approximately 10 meters (33 feet) in open space. Obstacles such as walls and other electronic devices may reduce this range.
The LED indicator will flash red, and you may hear a low battery warning sound when the battery is running low and needs to be charged.
Ensure the headphones are turned on and successfully paired with your device. Check the volume level on both the headphones and the connected device. If there is still no sound, try restarting the headphones and re-pairing them with your device.