Intempo EE1161 Valise Audio Instruction Manual
![Intempo EE1161 Valise Audio manual cover](/images/krBHvTekUzDtgKBmThBDuues/thumbs/thumb175x175.webp)
To set up the Intempo EE1161 Valise Audio Turntable, first place it on a stable surface. Connect the power adapter to a power outlet and the turntable. Open the lid, remove the stylus protector, and place a vinyl record on the turntable platter. Ensure the speed selector is set to the correct RPM for your record, and lift the tonearm to start playing.
If the turntable is not spinning, check that it is properly connected to a power source and that the power switch is turned on. Ensure the belt is properly attached to the motor and platter. If issues persist, consult the user manual for troubleshooting steps or contact customer support.
The Intempo EE1161 Valise Audio Turntable typically has a built-in volume control knob. Adjust the knob to increase or decrease the volume to your desired level. If connected to external speakers or a sound system, ensure those volume settings are also adjusted appropriately.
Ensure the volume is turned up and the speakers are properly connected. Check if the stylus is in good condition and properly aligned. Also, verify that the turntable is not set to "mute" mode and that all cables are securely connected.
To clean the stylus, use a stylus brush or a soft brush to gently remove any dust or debris. Always brush from the back to the front of the stylus to avoid damage. Avoid using excessive force or harsh chemicals.
Regular maintenance for the Intempo EE1161 includes cleaning the stylus, dusting the platter and exterior, checking and adjusting the belt if necessary, and storing the unit in a dust-free environment when not in use.
To switch between RPM speeds, locate the speed selector switch on the turntable. Adjust the switch to the desired speed (33, 45, or 78 RPM) based on the type of record you are playing. Ensure the record is compatible with the selected speed.
Check the condition of the record and clean it if necessary. Ensure the stylus is clean and in good condition. Verify that the turntable is on a stable surface and that the tonearm is properly balanced. Adjust the tracking force and anti-skate settings if available.
Yes, you can connect external speakers to the Intempo EE1161 Turntable. Use the RCA output jacks to connect the turntable to an amplifier or powered speakers. Ensure all connections are secure for optimal sound quality.
To replace the stylus, gently remove the old stylus by pulling it away from the cartridge. Align the new stylus with the cartridge and carefully push it into place until it clicks. Handle the stylus by the sides to avoid damaging the needle.