Intempo EE5037 Karaoke Instruction Manual
![Intempo EE5037 Karaoke Speaker manual cover](/images/dytpiDuQaCcqOiVZsOCckmyI/thumbs/thumb175x175.webp)
To pair your Intempo EE5037 with a Bluetooth device, turn on the speaker and activate the Bluetooth mode by pressing the Bluetooth button. On your device, enable Bluetooth and search for new devices. Select "Intempo EE5037" from the list to pair.
Ensure the charging cable is properly connected to both the speaker and a power source. Check if the power source is functioning. If the problem persists, try using a different charging cable or adapter.
To reset the speaker to factory settings, press and hold the power button for 10 seconds until the speaker turns off. Release the button and then power the speaker back on.
Use a soft, dry cloth to wipe the exterior of the speaker. Avoid using any harsh chemicals or abrasive materials. Ensure the speaker is turned off and unplugged while cleaning.
Yes, the Intempo EE5037 has a microphone input. Simply plug the microphone into the designated port and adjust the volume as needed.
Check if the speaker is properly paired with your device. Ensure the volume is turned up on both the speaker and the connected device. Try disconnecting and reconnecting the Bluetooth connection.
Press the mode button on the speaker to cycle through available modes such as Bluetooth, AUX, and FM radio. The current mode will be indicated by a light or sound prompt.
Yes, you can use the Intempo EE5037 speaker while it is charging. Simply ensure the charging cable is connected and the speaker is powered on.
Check the audio source for any issues. Ensure the speaker volume is not set too high, as this can cause distortion. Try adjusting the volume on both the speaker and the connected device.
To improve battery life, avoid overcharging the speaker and use it at a moderate volume level. Also, ensure to fully charge the battery before storing the speaker for extended periods.