Intempo EE1758 WDS19 Slimline Instruction Manual

To pair your headphones, ensure they are charged and turned on. Press and hold the power button until the LED indicator flashes blue and red. Enable Bluetooth on your device, search for new devices, and select "Intempo EE1758" from the list.
First, check the charging cable and port for any damage or debris. Try using a different charging cable and adapter. If the issue persists, reset the headphones by holding the power button for 10 seconds and then try charging again.
To reset the headphones, turn them off, then press and hold the power button for about 10 seconds until the LED indicator flashes. This will clear all previous pairings and reset the headphones.
Ensure that the headphones are within range of the paired device and there are no obstructions. Check the audio settings on your device and make sure the volume is set to a suitable level. Also, try pairing the headphones with another device to determine if the issue is with the headphones or the original device.
It is not recommended to use the headphones while charging to prevent potential battery issues and ensure optimal safety.
It typically takes about 2 to 3 hours to fully charge the headphones. The LED indicator will turn solid blue when the charging is complete.
The headphones can last up to 8 hours of continuous playback on a full charge, depending on the volume level and usage conditions.
Use a soft, damp cloth to gently wipe the exterior of the headphones. Avoid using any harsh chemicals or submerging the headphones in water. Regularly check the ear cushions and adjust as needed to maintain comfort and fit.
Ensure that the headphones are fully charged and within range. Try removing any obstacles between the headphones and the device. Additionally, unpair and then repair the headphones with your device to resolve connectivity issues.
Currently, the Intempo EE1758 headphones do not support user firmware updates. Check the manufacturer's website for any available updates or support information.