Intempo EE1145 Bursnell Mini Instruction Manual
![Intempo EE1145 Bursnell Mini Speaker manual cover](/images/gOpbDGDgSGKClbcSuLoZNrHT/thumbs/thumb175x175.webp)
To pair the speaker with your device, turn on the speaker and enable Bluetooth on your device. Search for available devices and select 'Intempo EE1145'. Once connected, you will hear a confirmation sound.
Ensure that the charging cable is properly connected to both the speaker and a power source. Try using a different charging cable or adapter to rule out a faulty cable. If the problem persists, contact customer support.
To reset the speaker, turn it on and hold the power button for about 10 seconds until the indicator light flashes. This will restore the speaker to its factory settings.
Use a soft, dry cloth to gently wipe the exterior of the speaker. Avoid using water or cleaning agents. For stubborn dirt, slightly dampen the cloth with water and ensure no moisture enters the speaker's openings.
Sound distortion may occur due to low battery, interference, or being too far from the connected device. Charge the speaker, reduce interference by moving away from other electronic devices, and ensure your device is within range.
Yes, the Intempo EE1145 Bursnell Mini Speaker can be used while charging. However, ensure the charging cable is securely connected and does not interfere with the speaker's placement.
The speaker typically takes about 2 to 3 hours to fully charge, depending on the power source used. Once fully charged, the indicator light will stop flashing.
The speaker offers up to 6 hours of continuous playback on a full charge, depending on the volume level and audio content.
Ensure the speaker is charged. If it still does not turn on, try resetting it by holding the power button for 10 seconds. If the issue persists, there may be a hardware problem, and you should contact customer support.
The Intempo EE1145 is not water-resistant. It is advised to keep it away from water and moisture to avoid damage.