Intempo EE1079 XL Retro Jukebox Instruction Manual

To connect your Jukebox Speaker to a Bluetooth device, turn on the speaker and press the 'Mode' button until you reach Bluetooth mode. Enable Bluetooth on your device and search for 'Intempo Jukebox'. Select it to pair and connect.
Ensure the speaker is properly plugged into a power source. Check the power cable for any damage. Try using a different outlet or power cable. If the issue persists, contact customer support.
To clean the speaker, use a soft, dry cloth to wipe down the exterior. Avoid using any abrasive cleaners or solvents. Regularly check for dust build-up around the controls and speakers.
Check that the volume is turned up on both the speaker and the connected device. Ensure that the speaker is in the correct mode and properly connected. Try reconnecting the device or switching to a different input mode.
To reset the speaker, turn it off and unplug it from the power source. Wait for a few minutes before plugging it back in and turning it on. This will reset most settings to factory defaults.
Yes, you can use the AUX input to connect non-Bluetooth devices. Use a 3.5mm audio cable to connect the device's headphone jack to the AUX input on the speaker.
First, check if the remote control's batteries need replacing. Ensure there are no obstacles between the remote and the speaker. If problems persist, try resetting the speaker or contact support.
Ensure that the speaker is placed on a stable surface and away from walls or obstructions. Adjust the EQ settings on your connected device for optimal sound. Regularly check for firmware updates that may improve performance.
Yes, insert a USB drive containing compatible audio files into the USB port on the speaker. Use the 'Mode' button to switch to USB mode to play the files.
Ensure that the Bluetooth device is within range and there are no obstacles causing interference. Check for Bluetooth settings or software updates on your device. If the issue continues, try resetting the Bluetooth connection.