Indesit SI6 1 W 1 Energy Label

To adjust the temperature settings, locate the thermostat dial inside the fridge. Turn the dial clockwise to lower the temperature and counterclockwise to raise it.
Ensure that the fridge is plugged in and the thermostat is set correctly. Check the door seals for any damage and clean the condenser coils at the back of the fridge.
To defrost, turn off the fridge and remove all items. Leave the door open to allow the ice to melt naturally. Clean the interior once defrosting is complete.
Regularly clean the interior and exterior surfaces. Check and replace door seals if necessary. Clean the condenser coils every 6 months to ensure efficient operation.
Unplug the fridge and locate the light cover inside. Unscrew or unclip the cover, remove the old bulb, and replace it with a new one of the same type. Reattach the cover and plug the fridge back in.
Check if the fridge is level and ensure that the drainage hole at the back of the fridge is not blocked. Clean the drainage hole if necessary.
Unusual noises could be due to the fridge being unlevel or items inside vibrating. Ensure the fridge is stable and that items are not touching the interior walls.
Keep the fridge away from heat sources and ensure there is adequate ventilation around it. Regularly defrost the fridge and keep the doors closed as much as possible.
Check and clean the door seals. Ensure no items are obstructing the door and adjust the fridge's leveling feet if necessary.
Empty the fridge, secure the doors with tape, and keep it upright during transport to prevent damage to the compressor.