Indesit LI8 S1E S UK Safety Instructions

To adjust the temperature settings, locate the temperature control dial inside the fridge compartment. Turn the dial clockwise to lower the temperature and counterclockwise to increase it. Monitor the temperature for a few hours before making further adjustments.
First, check if the fridge is plugged in and the power is on. Ensure that the doors are closing properly and the seals are intact. Clean the condenser coils at the back of the fridge and make sure there is enough space around the fridge for ventilation. If the issue persists, consult the user manual or contact customer support.
The freezer compartment is frost-free, so manual defrosting is typically not necessary. However, if you notice excessive frost build-up, you may need to defrost it manually by turning off the appliance and allowing the ice to melt.
To clean the interior, first remove all food items. Use a mixture of mild dish soap and warm water with a soft cloth to wipe down the surfaces. Avoid using abrasive cleaners or scrubbing pads. Rinse with clean water and dry with a soft towel before restocking the fridge.
Water pooling can be caused by a blocked defrost drain. Check the drain located at the back of the fridge and clear any blockages with a pipe cleaner or warm water. Ensure the fridge is level to prevent water from accumulating.
Ensure the fridge is level and stable on the ground. Check for loose parts or items inside that might be vibrating. Leave some space between the fridge and the wall for proper ventilation. If noise persists, refer to the user manual or contact support.
Distribute food evenly without blocking air vents to ensure proper air circulation. Store raw meats on the lower shelves, dairy in the upper section, and use door compartments for condiments and drinks.
Unplug the fridge before changing the bulb. Remove the cover by unscrewing it or snapping it off, depending on the model. Replace the bulb with one of the same type and wattage, then reattach the cover and plug the fridge back in.
Clean the seals with warm soapy water to remove any dirt. Check for any damage or wear and replace the seals if necessary. Ensure the fridge is level to help the doors seal properly.
Keep the fridge away from heat sources and ensure it is well-ventilated. Regularly clean the condenser coils and maintain the door seals. Avoid overloading the fridge and set the temperature to the recommended settings.