Indesit Integrated DIO 3T131 FE UK Energy Label
![Indesit Integrated DIO 3T131 FE UK Dishwasher manual cover](/images/UdVqHVQSmPrqkSTGzSeNqryi/thumbs/thumb175x175.webp)
To reset your Indesit dishwasher, press and hold the start/pause button for about 3 seconds until the LED indicators start flashing. Release the button, and the dishwasher should be reset.
First, check the drain hose for kinks or blockages. Ensure that the sink drain is not clogged. Clean the dishwasher's filter and inspect the pump impeller for obstructions.
Ensure that you're using a good quality rinse aid, which helps water to sheet off dishes. Select a higher temperature setting if available, and open the door slightly after the cycle to allow steam to escape.
Noises can be caused by items touching inside the dishwasher or loose components. Ensure that items are properly loaded and not touching each other. Check spray arms for obstructions and make sure they rotate freely.
Remove the lower rack and twist the cylindrical filter located at the bottom of the dishwasher counterclockwise and lift it out. Rinse it under running water to remove debris and reassemble it securely.
Check if the dishwasher is properly plugged in and that the circuit breaker is not tripped. Ensure the door is completely closed and latched. Check the control panel settings and reset if necessary.
It's recommended to check and clean the spray arms every few months. Remove them and rinse under water, using a toothpick to clear any blocked holes.
A white film can be caused by hard water. Ensure you are using the right amount of detergent and consider using a dishwasher cleaner or a water softening agent to reduce mineral deposits.
No, regular dish soap can create excessive suds and cause the dishwasher to overflow. Always use detergents specifically designed for dishwashers.
Regularly clean the filter, spray arms, and door seals. Check for and remove any debris from the drain, and run an empty cycle with a dishwasher cleaner to maintain performance.