Indesit Integrated DIC 3B 16 UK Energy Label
![Indesit Integrated DIC 3B 16 UK Dishwasher manual cover](/images/qQhcVZQkQxyqwMjhlRJeKnSC/thumbs/thumb175x175.webp)
To reset the Indesit Integrated DIC 3B 16 UK Dishwasher, turn off the appliance by pressing the power button. Unplug it from the power source, wait for about 10 minutes, then plug it back in and turn it on.
Check if the drain hose is kinked or blocked. Ensure that the sink drain is not clogged, and clean the dishwasher's filter and pump area.
Remove the lower dish rack to access the filter. Twist the filter counterclockwise and lift it out. Rinse it under running water and use a soft brush to remove any debris. Reinsert and secure the filter before using the dishwasher.
Ensure that you are using a rinse aid, as this helps with drying. Check if the drying cycle is selected and that the dishwasher door is not opened immediately after the cycle ends.
A flashing light usually indicates an error. Refer to the user manual for the specific error code and troubleshooting steps associated with the flashing pattern.
It is recommended to clean the spray arms every three months. Remove them carefully and rinse under water to clear any blockages. Use a toothpick to unclog any holes if necessary.
Use a high-quality dishwasher detergent designed for automatic dishwashers. You may use tablets, powder, or gel, depending on your preference and the manufacturer's recommendations.
Ensure that no dishes or utensils are obstructing the spray arms. Check for loose items in the dishwasher and inspect for any foreign objects in the filter or pump area.
Place larger items such as pots and pans on the bottom rack, and smaller items like cups and glasses on the top rack. Ensure that items do not block the spray arms and that all items are dishwasher-safe.
Regularly clean the door seals, filter, and spray arms. Run an empty cycle with a dishwasher cleaner monthly to maintain performance. Check for any leaks and ensure connections are secure.