Indesit Innex BDE 1071682X W UK N Energy Label

To start a wash and dry cycle, load your laundry, add detergent, select the desired wash and dry program using the control dial, and press the start button. Ensure the door is closed properly before starting.
If your washer dryer is not draining, check for blockages in the drain hose or filter. Ensure the drain hose is not kinked and the filter is clean. If the problem persists, consult the user manual or contact customer support.
To clean the detergent drawer, remove it by pulling it out and then pressing the release lever. Wash it with warm water and a soft brush. Ensure it is completely dry before reinserting it into the machine.
Excessive noise may be due to an unbalanced load, foreign objects in the drum, or uneven flooring. Ensure the machine is level, and redistribute the laundry evenly. Remove any foreign objects from the drum.
To perform a maintenance wash, run an empty cycle with hot water and a cup of white vinegar or a washing machine cleaner to remove detergent residues and mold. Regular maintenance washes help keep your machine clean and efficient.
Ensure the machine is plugged in and the door is securely closed. Check the fuse and circuit breaker. If the machine still does not start, try resetting it by turning it off and on again. Consult the manual for further troubleshooting steps.
Use the program selector dial to choose from various wash cycles. Refer to the control panel for specific cycle options, such as cotton, synthetic, or delicate, depending on your laundry needs.
To minimize wrinkles, shake out your clothes before loading them, avoid overloading the drum, and select an appropriate drying cycle. Remove clothes promptly after the cycle ends.
To enhance efficiency, always run full loads without overloading, use the correct amount of detergent, clean the filter regularly, and perform maintenance washes periodically.
Turn off and unplug the machine. Open the filter cover, usually located at the bottom front of the machine. Unscrew the filter cap, remove it, and clean any debris. Rinse the filter under running water and replace it securely.