Indesit ID60G2A Energy Label
![Indesit ID60G2A Cooker manual cover](/images/NxyZPijtVACfuzvJzmiwNozS/thumbs/thumb175x175.webp)
To set the clock on your Indesit ID60G2A Cooker, press the 'Clock' button until the display starts flashing. Use the '+' and '-' buttons to adjust the time, then press 'Clock' again to save the setting.
The clicking sound is normal and is caused by the ignition system sparking to light the gas burners. If the clicking continues after the burner is lit, ensure the knobs are turned to the correct position.
To clean the oven door glass, remove it according to the manual's instructions. Use a non-abrasive cleaner and a soft cloth to wipe the glass clean. Make sure it is dry before reassembling.
If your oven is not heating, first check if it is properly plugged in and that the circuit breaker hasn't tripped. Ensure the oven's timer is not set, and that the thermostat is adjusted correctly. If the problem persists, consult a professional technician.
It's recommended to have your Indesit cooker serviced annually by a qualified technician to ensure optimal performance and safety.
Yes, the Indesit ID60G2A Cooker can be converted to use LPG gas. This should be done by a qualified gas engineer who can install the correct jets and adjust the appliance accordingly.
If the oven light does not turn on, it may be due to a burnt-out bulb. Replace the bulb with a new one that matches the specifications. If the problem persists, there may be an electrical issue requiring professional inspection.
Remove the burners and soak them in warm soapy water. Use a brush to remove any residue, then rinse and dry them thoroughly before reassembling. Make sure the burners are completely dry before use.
Error codes indicate specific issues with your cooker. Consult the user manual for a list of error codes and their meanings. If unsure, contact Indesit customer support for assistance.
To improve energy efficiency, always use the appropriate-sized burner for your cookware, keep the oven door closed as much as possible, and ensure seals are intact to prevent heat loss. Regular maintenance also helps maintain efficiency.