Indesit I2 D81S UK Energy Label

To clean the lint filter, open the dryer door and locate the lint filter at the bottom of the opening. Pull the filter out, remove any lint by hand or with a soft brush, and reinsert it securely before using the dryer again.
If the dryer is not heating up, check if the appliance is properly plugged in and the circuit breaker is not tripped. Ensure the selected drying cycle is appropriate, and clean the lint filter and vent system. If the issue persists, consider contacting a professional technician.
The condenser unit should be cleaned every month. Remove it from the dryer, rinse it under running water, and let it dry completely before reinserting it. Regular cleaning ensures optimal drying performance.
Unusual noises may be due to objects trapped in the drum or filter, or the dryer not being level on the floor. Check the drum for loose items, clean the filter, and adjust the dryer's leveling feet if necessary.
To prevent shrinking, use a lower heat setting or a delicate cycle. Always check clothing labels for recommended drying instructions and avoid overloading the dryer.
Shake out clothes before placing them in the dryer to prevent clumping. Do not overload the drum; leave enough space for clothes to tumble freely, which improves drying efficiency.
To reset the dryer, unplug it from the power source and wait for a few minutes before plugging it back in. If the problem continues, refer to the user manual for further troubleshooting steps or contact customer support.
It is not recommended to dry shoes in the dryer as this can cause damage to both the shoes and the appliance. Instead, air dry them or use a specialized shoe drying rack if available.
A musty smell can be eliminated by cleaning the lint filter, vent system, and drum with a mild detergent. Ensure that the dryer is properly ventilated and avoid leaving damp clothes inside for prolonged periods.
Regular maintenance includes cleaning the lint filter after every use, inspecting and cleaning the vent system monthly, and checking the door seal for any debris. Perform these tasks to maintain dryer efficiency and safety.